Results 1 to 7 of 7

Thread: Discovery & Range Rover Diffs

  1. 1st September 2005, 05:00 PM #1
    walker's Avatar
    walker
    walker is offline Wizard
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    1,937
    Total Downloaded
    0

    Discovery & Range Rover Diffs

    Does anyone know if the Disco2 Diff is the same as the Range Rover Classic Diff? I just have an ARB locker in my Disco and would like to remove it and put it in the front of my '77 Rangie.

    I have a maxidrive in the rear which I got 2nd hand but cannot afford to get one for the front. I know I will have to replace the axels with maxidrive 24spline jobbies to fit but this is cheaper than a locker and I probably need maxidrive axels anyway the way i drive.
    Reply With Quote Reply With Quote
  2. 1st September 2005, 08:34 PM #2
    rangieman's Avatar
    rangieman
    rangieman is offline Swaggie
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    disco has fine spline axles early rangie ha coarse. as far as i know all axles and diffs interchange. front axles on a disco are attached to the cv where as a early rangie both axles are seperate to the cv
    Reply With Quote Reply With Quote
  3. 1st September 2005, 08:43 PM #3
    walker's Avatar
    walker
    walker is offline Wizard
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    1,937
    Total Downloaded
    0
    Mmmm. So you are saying that the ARB locker in my Disco2 will fit in my Rangie. :? :?
    Reply With Quote Reply With Quote
  4. 2nd September 2005, 12:30 AM #4
    rangieman's Avatar
    rangieman
    rangieman is offline Swaggie
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    YES it should but you will have to use axles and cv out of disco
    Reply With Quote Reply With Quote
  5. 2nd September 2005, 08:41 AM #5
    walker's Avatar
    walker
    walker is offline Wizard
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    1,937
    Total Downloaded
    0
    Well I aint going to do that (Disco2 CV's suck) but I will see if maxidrive can make axels to suit.
    Reply With Quote Reply With Quote
  6. 2nd September 2005, 10:26 AM #6
    HSVRangie Guest
    Jac Mac in Melb will make axles to suit.

    Michael.
    Reply With Quote Reply With Quote
  7. 2nd September 2005, 12:00 PM #7
    reklaw47's Avatar
    reklaw47
    reklaw47 is offline Fossicker
    Join Date
    Jan 1970
    Location
    Ringwood North, Melbourne.
    Posts
    38
    Total Downloaded
    0
    Thanks Michael. I also spoke to maxi-drive and they make axels to suit as well but it seems that JacMac may be a fair bit cheaper.
    Reply With Quote Reply With Quote
« 2nd Gear take off in unladen D90 -Ok? | Electric Cooling Fans On V8 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!