Results 1 to 5 of 5

Thread: Cooling system question

  1. 2nd April 2016, 10:55 PM #1
    Baggy's Avatar
    Baggy
    Baggy is offline Master
    Join Date
    Jan 1970
    Location
    Perth WA
    Posts
    511
    Total Downloaded
    0

    Cooling system question

    Hi All

    Ive recently acquired a 1992 Range Rover with 3.9 v8 auto

    The plastic resevior has a plastic cap which incorporates a low fluid level sensor,

    Now the sensor plug is missing and I'm wondering if the black plastic cap used on a series 1 Disco (say 1996 v8i) would be the equivalent to replace it as it seems pointless purchasing the original cap for $68.00c.

    Any advice would be appreciated

    Cheers

    Baggy
    Reply With Quote Reply With Quote
  2. 3rd April 2016, 01:50 PM #2
    eddy's Avatar
    eddy
    eddy is offline Master Supporter
    Join Date
    Aug 2007
    Location
    Mandurah WA
    Posts
    659
    Total Downloaded
    0
    If the wiring for the sensor cap is still there...stick with it ....could save a lot of grief resulting from loss of coolant!Shop around for a cap eg PRC7925 | Low Level Water Sensor Rr Classic - Land Rover Part PRC7925
    Reply With Quote Reply With Quote
  3. 3rd April 2016, 02:04 PM #3
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    And it is a bit trickey as the although the cap just has a reed switch in it, the signal is reversed from what you would expect, and is interpreted by the dash ECU .
    I thought That I could just fit any reed switch but no it has to be the cap.
    If you just bridged the contacts the light didn't come on.

    So buy a switch/cap.

    Regards Philip A
    Reply With Quote Reply With Quote
  4. 3rd April 2016, 02:48 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    the d1 cap fits from memroy and if needed you can add an aftermarket level switch.

    by the time you faff around its cheaper to just get the proper replacement cap.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  5. 3rd April 2016, 10:05 PM #5
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    D1 cap has the pressure relief in it so the sensor wont fit and valve wont work.

    Sent from my GT-I9300 using AULRO mobile app
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
« Hella hazard switch problem. | Should I run an earth cable? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!