Results 1 to 5 of 5

Thread: DII Front Recovery Points

  1. #1
    ATLandy Guest

    DII Front Recovery Points

    Hi all ,

    Where would be the ideal location to fit Jate rings or tow hooks on the front of a DII with stock bumper ? As the front bumper sit so low any recovery work will damage it if recovery points are fitted on the chasis behind the bumper . A picture is appreciated .

    Ta

  2. #2
    tombraider Guest
    The stock bumper has an accesspoint to the factory tow hook.
    Bruce Davis makes a 10t rated recovery point to go in its place.

    Give Bruce a call.

    Cheers
    Mike

  3. #3
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Hi ATlandy
    If you intend doing any serious offroading you really need to remove the bumper and fit an aftermarket bar to replace it.
    I have an aftermarket bullbar on mine,it has too deep a skirt below it,it got fairly dented last time out,the front ramp angle is hampered with the stock plastic bumper.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  4. #4
    ATLandy Guest
    Hi all ,

    Tombraider , the access point on the bumper to factory tow hook , is it the mesh grill at the bottom of the bumper ? Left or right side of the mesh grill for the tow hook ? Can I fit two hooks in front ? Not looking at the Disco now , will check later .

    LandyAndy ,yes a replacement bar would be ideal but not at this moment .

    Ta.

  5. #5
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Originally posted by ATLandy
    Hi all ,

    Tombraider , the access point on the bumper to factory tow hook , is it the mesh grill at the bottom of the bumper ? Left or right side of the mesh grill for the tow hook ? Can I fit two hooks in front ? Not looking at the Disco now , will check later .

    LandyAndy ,yes a replacement bar would be ideal but not at this moment .

    Ta.
    It's a access panel passenger side next to the mesh, it comes out.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!