Thread: Sliders for Rangie / Disco

Going by the silence of his response they are going to cost us nothing 8O

I would also be interested in a set. Had a look at some others today from a poular retailer in Vic and they did not look anywhere near as good.

Ian

if i started to make all these sets at work i would be out of a job!
one or two here and there no probs but at last count
its more like 10 sets and a few defender ones and a set for an
S2 disco. i only have measurements for S1 disco and classic rangie
atmo.

if only i was in brissy with my shed and fab equipment ide
go into production.

but hate to say it but, sorry fellas.
i might do a set here and there.

<div class='quotetop'>QUOTE</div><div class='quotemain'>Had a look at some others today from a poular retailer in Vic[/b][/quote]
if these are the round pipe ones then they will bend easy.
if you could ever bend mine you'de be needing a new car!
thats why they are $475 a set.

phil.

maybe you could tell us how to make them Eg: type of metal and so on

maybe you could tell us how to make them Eg: type of metal and so on or a diagram sort of plan.

I dont know maybe a silly thought ops:

50x50x5RHS
75x50x5angle
28mm NB blk pipe
28mm NB 90 elbows
6x 3/8unf x 4'' bolts
and handfull of 4mm rivetts
3 bends in the box
and a bit of welding and drilling

theres enough photos on here of my sliders
so grab your self a tape and start measuring!

phil

dont forget that the bottom door line of S1 disco and RRC arnt
parrell to the chassis on the verticle or horizontal.

Originally posted by discowhite
i only have measurements for S1 disco and classic rangie
atmo.

<span style="color:blue">
hey....do you want me to bring lurch around so you could measure him up.....?</span>

Thanks for that, I have a mate how works as a coach body builder so I will see if he will make some.

Cheers