Results 1 to 3 of 3

Thread: IIa ride height measurements

  1. #1
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB

    IIa ride height measurements

    Does anybody know what the original ride height is for a Series 2a? Chassis preferably as the hub to guards are hard when there are no rear guards. I'm setting up the suspension now, and would like to work it to the letter of the new ADR guidelines as best as possible.

    TIA
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  2. #2
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,523
    Total Downloaded
    0
    Can't find it in any of my references. Best I can find (in original owner's manual) is overall height, which you could work off - as follows.

    Hood up (over hood bows) 88 1.97m
    Over hard top or cab
    88 1.95m or 1.98m
    109 2.06m or 2.07m

    Second figure is for the station wagon.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB
    JDNSW, thanks for these measurements! I didn't realise they were so high. The other one which I've just picked up seems to be a bumpstop clearance of 2-3" +/- 1". I'll have to check it out.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!