Thread: Knock Sensor connector, need help identifying it

Originally Posted by sierrafery

Indoubt that the alternator plug will fit, i cropped and edited the images, the plug which is good should have 3 guiding tracks at the top and3 at the bottom (as those marked with blue) which are only 2 on the aleternator connector to fit into those channels(which i marked with red only at the bottom) on your first picture which are also 3 at the top and 3 at the bottom if you see what i mean

The pics do not really show up all that well - on the the bottom, guiding tracks are on the outside and fit into slots in the sensor - where your right red arrow is and a bit to the left of your left red arrow. There is nothing in between to provide interference where your middle red arrow is. The top two guides go into slots in the sensor.

All hard to visualise in the pics but obvious when you have both parts in front of you. I think that the LS Alternator plug should fit as it certainly seems to have the right guides in the right positions but there are some minor differences elsewhere that should not matter.

Garry

Ok, just to close the loop on this one. The connectors I had ordered (Bosch 2 Pin Late Female) actually ended up fitting the knock sensors Happy days. Looks like a couple of different varieties fit then?

Thanks for your input Garry.