I can't see any reason why not. They might even be more accurate, although near enough is probably good enough.
Don.
Hello All,
On some pre-load measurements for Series Land Rover parts I have seen YouTube clips where they use Fish Weight Scales. I have seen the old beam spring style ones and the analogue dial faced ones used on the clips.
Would the newer digital style be okay to use? I have included photos of each style of scale.
Swivel Pin Housing pre-load of 1.16 to 1.46 kg accessed 28th January 2020 from YouTube at the 7:20 time stamp
Kind regards
Lionel
I can't see any reason why not. They might even be more accurate, although near enough is probably good enough.
Don.
Any of them should work, but watch that the digital one does not have a lag on their reading - this could lead to an incorrect reading as it is hard to keep it moving steadily even for a few seconds.
The saving grace is that the preload is not all that critical - just needs to be in the right ball park. (but measure it with the seal not installed)
I have always used the scales in the first picture
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks