Results 1 to 9 of 9

Thread: info on diffs

  1. 14th July 2006, 02:58 PM #1
    V8Landy's Avatar
    V8Landy
    V8Landy is offline Wizard
    Join Date
    Jan 1970
    Location
    Colac foot of the otways
    Posts
    1,505
    Total Downloaded
    0

    info on diffs

    Just wondering if the diffs from a 95 disco will bolt straight into my 91 disco without any modifications.I'm thinking of selling my 95 disco but would like to hang onto my maxidrive(not long rebuilt the rear diff).
    Any help would be appreciated
    Brett
    Reply With Quote Reply With Quote
  2. 14th July 2006, 03:04 PM #2
    101RRS's Avatar
    101RRS
    101RRS is online now LordRover Supporter
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    I think 94 on discos are 24 spline but earlier ones are 10 spline so will only go in if axles/hub splines etc are changed also.

    Gazzz
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon
    Reply With Quote Reply With Quote
  3. 14th July 2006, 03:24 PM #3
    V8Landy's Avatar
    V8Landy
    V8Landy is offline Wizard
    Join Date
    Jan 1970
    Location
    Colac foot of the otways
    Posts
    1,505
    Total Downloaded
    0

    Question

    Quote Originally Posted by garrycol
    I think 94 on discos are 24 spline but earlier ones are 10 spline so will only go in if axles/hub splines etc are changed also.

    Gazzz
    Yeh i'm thinking swapping the whole thing axle to axle brakes and all if possable
    Reply With Quote Reply With Quote
  4. 14th July 2006, 03:44 PM #4
    DaveS3
    DaveS3 is offline Wizard
    Join Date
    Jan 1970
    Location
    Box Hill, Victoria
    Posts
    1,170
    Total Downloaded
    0
    Yep do it.

    The housings ect are exactly the same, brakes should be to.

    Dave.
    Reply With Quote Reply With Quote
  5. 14th July 2006, 03:56 PM #5
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    only differance might be the front discs?? could be soild or vented?? but if you are going hub to hub, will fit fine

    phil
    Reply With Quote Reply With Quote
  6. 14th July 2006, 04:01 PM #6
    Rovercare at work Guest
    Will be fine, will need to swap tailshaft if you still have the rubber donut, calipers will change over.
    Reply With Quote Reply With Quote
  7. 14th July 2006, 04:18 PM #7
    V8Landy's Avatar
    V8Landy
    V8Landy is offline Wizard
    Join Date
    Jan 1970
    Location
    Colac foot of the otways
    Posts
    1,505
    Total Downloaded
    0
    Thanks guys looks like i will have to put a week aside in the near future to get it all organized and the other ready for sale
    Reply With Quote Reply With Quote
  8. 14th July 2006, 05:38 PM #8
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    Check if the older Disco has 2 brake hoses per caliper - I put 1997 Disco axels under my 1987 Rangie but had to use the Rangie calipers as it was a PITA to replumb using the Disco front calipers with single hoses.

    HTH

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
  9. 14th July 2006, 06:56 PM #9
    V8Landy's Avatar
    V8Landy
    V8Landy is offline Wizard
    Join Date
    Jan 1970
    Location
    Colac foot of the otways
    Posts
    1,505
    Total Downloaded
    0
    Quote Originally Posted by LRHybrid100
    Check if the older Disco has 2 brake hoses per caliper - I put 1997 Disco axels under my 1987 Rangie but had to use the Rangie calipers as it was a PITA to replumb using the Disco front calipers with single hoses.

    HTH

    LRH
    I will have a look tomorrow and will use which ever is easiest.Thanks
    Reply With Quote Reply With Quote
« Advice for Service | Transfer case woes »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!