Hi All,

First of all, thanks for all those who helped with my head gasket questions. Everything is finally back together and so far there are no leaks.

However, when I started the disco up for the first time today, she's idling at about 1500rpm and when I took it for a slow drive around it actually drives itself no accelerator required. Braking was another issue .

My guess is the throttle position sensor is not set up properly, so I was wondering if there are any tricks to installing it. I noticed that it didn't slot straight into the socket. I had to twist it about 20 degrees before the little paddle lined up with the slot in the plenum. This meant that when the screw holes lined up the sensor was already turned somewhat. Is this normal? Is there something I need to do with the accelerator setup at the other side to ensure the sensor doesn't have to be twisted?

Any help would be greatly appreciated.

I can't wait to get the disco back on the road or off the road as the case may be.

Cheers,

Harvs.