Reply With QuoteIs the replacement PS pump a BM PARTS ANR2157 <A> ?
(Loaded question)
BTW I don't remember a struggle with the pump removal when CJ and I did mine.
SysAdmin (Owner)
finally got all the bits together to do this little job, going to replace some cooling system parts as well, hoses and tank etc.
got my bits from Karcraft and MR Autos, what one didnt have the other did, thanks fellas, the great service from both was much appreciated!
got my fan spanner and hub spanner from ebay, great value for money seeing next to no one sells them up this way. actually found somewhere to buy a 9mm allen key for the pumpshaft, wonders will never cease.
5 mins and i have the fan off, cowling out of the way, whips out the 10mm socket, 9mm allen key in the shaft, attempt to remove bolt, grunt, bigger grunt... mongrel... not a hint of movement, bloody sore hands though....
out with braker bar and bit of pipe.... grunt... GRUNT... dam, still no go..
read manual to make sure not left hand thread...
manual says use loctite on screws.... you gotta be joking...
off to hire oxy bottles in the morning dam it......bloody land rovers
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Moderator
Is the replacement PS pump a BM PARTS ANR2157 <A> ?
(Loaded question
BTW I don't remember a struggle with the pump removal when CJ and I did mine.
Last edited by one_iota; 4th August 2006 at 07:20 PM.
Mahn England
DEFENDER 110 D300 SE '23 (the S M E G)
Ex DEFENDER 110 wagon '08 (the Kelvinator)
http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html
Ex 300Tdi Disco:
SysAdmin (Owner)
BM parts something or other...Originally Posted by one_iota
must have been the bit CJ did maybe :P
wish i could say the same...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Moderator
Ok
The BM Parts Pump on mine is noisy in operation...so be prepared
CJ wields spanners for a living...
Mahn England
DEFENDER 110 D300 SE '23 (the S M E G)
Ex DEFENDER 110 wagon '08 (the Kelvinator)
http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html
Ex 300Tdi Disco:
SysAdmin (Owner)
such is life... to be expected i suppose...
as they say in the movie once upon a time in a place farway from here... been there done that, if i wasnt broke i wouldnt be doing it now either :PCJ wields spanners for a living...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Moderator
But we do it for fun or..... buy a Commodore
Mahn England
DEFENDER 110 D300 SE '23 (the S M E G)
Ex DEFENDER 110 wagon '08 (the Kelvinator)
http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html
Ex 300Tdi Disco:
SysAdmin (Owner)
they are too low, they make my back ache :PBut we do it for fun or..... buy a Commodore
i prefer the wallet ache....
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Wizard
You don't need oxy - it's just a leverage problem.
Try one of these ( $10 from Supercheap)
Then the 1/2inch drive ratchet should suffice.
SysAdmin (Owner)
unfortunetly the bolts are as tight as the hobs of hell and i can not move them with a 18" breaker bar much less a 1/2" rachet...
the standard bolts are 10mm and i have nearly stripped the head on one trying to undo it. There is obviously the wrong type of loctite under the headflange of the bolts.
the pump shaft has a 9mm hex in the center of it to hold it steady while you undo it...and i was having no problems with it... apart from finding one in the first place :P
judging by the scoring on the bolt heads before i started, someone else had the same problem and gave up at some stage...
i cant see anyway around it other than heat or a chisel.... i prefer not to use a chisel.
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
ChatterBox
I feel your pain INC.. my nemeisis is the rear pinion Flange nut, standing on a 6ft breaker bar and it supporting me no worries
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks