Thread: Td5 timing chain advice

Link to that part list. I hope...

Thankyou I think my bolt I need is bolt 4

from what I can tell, it should be THIS one.

never bought from LR Direct, but they're supposed to be reputable.

I would guess that a reputable nut/bolt/engineering supplies place would have this bolt type locally ..... assuming you have an easily accessible local nut/bolt/engineering supplies place near you, of course.

While you have it out, beg borrow or steal a tap to run down into the block to clean up the threads inside there. 99.999% sure that if the bolt is mangled, so too will be the inner threads too.

That parts list was perfect!! Legend

The inner thread is indeed very un well
Thankyou

Originally Posted by AK83

from what I can tell, it should be THIS one.

never bought from LR Direct, but they're supposed to be reputable.

I would guess that a reputable nut/bolt/engineering supplies place would have this bolt type locally ..... assuming you have an easily accessible local nut/bolt/engineering supplies place near you, of course.

While you have it out, beg borrow or steal a tap to run down into the block to clean up the threads inside there. 99.999% sure that if the bolt is mangled, so too will be the inner threads too.

Says they are same as rocker cover ones! Got spare of those

So big mess in bottom of sump. Missing plastic part was in there too.LOTS of metal. Oil pick up filter looks to have done its job of stopping it going into motor. hopefully no tiny bits got through.
All new cogs, ans both timing chain and the little oil pump one are now new.
Need a new copper Washer for the big timing bolt
But on the its going back together side now

You got loctite on the bolt for the oil pump one????

Sure do

Originally Posted by Tins

You got loctite on the bolt for the oil pump one????