Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Strange 4th gear problem

  1. #11
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    my 93 disco did something similar but I couldnt get 4th at all, on pulling the top apart as prep to get the box out saw the busted tab sitting there on the selector ball at the back mechanically blocking out 4th.. pulled it and welded it and all went well till the guide spring broke then it was pretty much a lotto as to weather you got the 3/4 selector or the r/5 fixed it when I sold it as part of the sale deal.

    IF that aint it then your syncro spring or clutch cone is U/Sish on fourth, changing up the gears will mean your trying to speed up the ass end of the box changing down means that they are slowing down and will help whats left of the syncro do its job. if your any good at it give double cluthcing a go and see if you can get it in.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  2. #12
    Join Date
    Jan 1970
    Location
    CROMER, NSW
    Posts
    2,048
    Total Downloaded
    0
    while we are on the subject, any one got any ideas why my LT95 wont go into fifth. it goes thru the first four ok and reverse is fine, but i just can't get it to go to 5th.
    LAND ROVER;
    HELPING PUT OIL BACK IN THE GROUND FOR 70 YEARS
    CARS DON'T GET ANY "GREENER" THAT.

  3. #13
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Quote Originally Posted by barney
    while we are on the subject, any one got any ideas why my LT95 wont go into fifth. it goes thru the first four ok and reverse is fine, but i just can't get it to go to 5th.


  4. #14
    Join Date
    May 2006
    Location
    Keperra, brissy
    Posts
    19
    Total Downloaded
    0
    Looked in the top of my gearbox last night, all looked well, no broken tab, bias springs ok, will just have to drive it as is for now, no time or dollars to pull box out, seems to be a synchro related problem. Discovered yesterday if speed is no more than 35kmh it will change from 3rd to 4th, but if 40 kmh or over no way will it go in, no grating or anything. Will change down from 5th, just have to alter driving style for now, either change up from third real early or rev it a bit then straight to 5th. Thanks for the help.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!