Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Cost to rebuild an S3 2.6L motor??

  1. 18th October 2006, 11:40 AM #1
    OldDog
    OldDog is offline Master
    Join Date
    Jan 1970
    Location
    Cobar, New South Wales
    Posts
    228
    Total Downloaded
    0

    Cost to rebuild an S3 2.6L motor??

    Howdy All,
    Well after much soul searching (and a few tyre kickers) i've decided to keep the S3 and put it back as close as possible to original condition. Oddly enough it was the recent gift of a Fairey overdrive that decided me to keep going with the project.
    So, the question is, the 2.6 litre motor is shagged, 60thou oversize bores that have a few scoures in them, general wear in the bearings but no damage. I've given the bores a light scuff with a hone and they're not extreme, i may get away with a new set of 60 over pistons and rings, but it wouldn't be spot on. A lot of the bearings are worn etc so would have to replace them anyway, so it's a small step to just strip the whole bloody thing down and get it sleeved. Anyone know of a company that would sleeve this motor (it's a bit more difficult due to the sloped block to cyl head face)? Any idea's on the cost? It might just be more $$$smart to buy one in good nick, anyone know of one lying around?
    Thanks Everyone
    Bill
    Reply With Quote Reply With Quote
  2. 19th October 2006, 03:13 PM #2
    OldDog
    OldDog is offline Master
    Join Date
    Jan 1970
    Location
    Cobar, New South Wales
    Posts
    228
    Total Downloaded
    0
    Nobody?
    Reply With Quote Reply With Quote
  3. 19th October 2006, 03:57 PM #3
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,529
    Total Downloaded
    0
    Can't really help - six years ago I saw two reconditioned (ex-army) 2.6 engines in crates go at auction (near Lue) for (from memory) $150 each. They had a great deal of difficulty raising a bid. I nearly bid on one myself, but my trailer was already full! (well, not literally, as I had not started to load it but I knew what I had bought so far, including three complete new 2a rear axles and a radiator, plus a bunch of other stuff)

    Sorry if this makes you feel bad, but I suspect that those engines may still be lying round someone's shed(s), as it was clear the bidder(s) did not really need them.

    But I've never owned a six, so can't really help
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  4. 19th October 2006, 06:08 PM #4
    tony's Avatar
    tony
    tony is offline AT REST
    Join Date
    Jan 1970
    Location
    S.W. Sydney
    Posts
    835
    Total Downloaded
    0
    Try the newcastle 4x4 mob, Peter used to own it but I think he sold out,I swoped a 6 cyl (x army in box) for a ZF there a few years ago they may still have it

    If not try LVS at silverdale Brian should be able to help

    Alternatively my partner has a 6 that came out of a GS still ran sweet as a bell only changed it cuz we had a brand spanker still in the Land Rover box to put in. she might be convinced to get rid of it

    T
    Reply With Quote Reply With Quote
  5. 19th October 2006, 06:18 PM #5
    OldDog
    OldDog is offline Master
    Join Date
    Jan 1970
    Location
    Cobar, New South Wales
    Posts
    228
    Total Downloaded
    0
    Quote Originally Posted by tony
    Try the newcastle 4x4 mob, Peter used to own it but I think he sold out,I swoped a 6 cyl (x army in box) for a ZF there a few years ago they may still have it

    If not try LVS at silverdale Brian should be able to help

    Alternatively my partner has a 6 that came out of a GS still ran sweet as a bell only changed it cuz we had a brand spanker still in the Land Rover box to put in. she might be convinced to get rid of it

    T
    Thanks Tony, i'll get onto the yellow pages now and get that number, never know your luck eh?
    Now that avatar......looks suspiciously like 3rd Parachute Regiment? , you serve?

    Bill
    Last edited by OldDog; 19th October 2006 at 06:31 PM.
    Reply With Quote Reply With Quote
  6. 19th October 2006, 06:34 PM #6
    tony's Avatar
    tony
    tony is offline AT REST
    Join Date
    Jan 1970
    Location
    S.W. Sydney
    Posts
    835
    Total Downloaded
    0
    Quote Originally Posted by OldDog
    Thanks Tony, i'll get onto the yellow pages now and get that number, never know your luck eh?
    Now that avatar......looks suspiciously like 3rd Parachute Regiment? , you serve?

    Bill

    Yer Bill a long time ago.............got out 84 how about yourself


    T
    Reply With Quote Reply With Quote
  7. 19th October 2006, 06:42 PM #7
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,504
    Total Downloaded
    0
    Pity your not in Albany I know of a series 6 pot thats been sitting in an engine stand for bloody ages now
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  8. 19th October 2006, 09:29 PM #8
    OldDog
    OldDog is offline Master
    Join Date
    Jan 1970
    Location
    Cobar, New South Wales
    Posts
    228
    Total Downloaded
    0
    Quote Originally Posted by tony
    Yer Bill a long time ago.............got out 84 how about yourself


    T
    '88, small world ain't it?
    Reply With Quote Reply With Quote
  9. 19th October 2006, 09:30 PM #9
    OldDog
    OldDog is offline Master
    Join Date
    Jan 1970
    Location
    Cobar, New South Wales
    Posts
    228
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus
    Pity your not in Albany I know of a series 6 pot thats been sitting in an engine stand for bloody ages now
    Arg, would've been just the thing. Theres gotta be something laying about over this side.
    Thanks anyway. Bill
    Reply With Quote Reply With Quote
  10. 19th October 2006, 10:27 PM #10
    UncleHo's Avatar
    UncleHo
    UncleHo is offline AT REST
    Join Date
    Oct 2003
    Location
    Godwin Beach Qld
    Posts
    8,688
    Total Downloaded
    0
    G'day OldDog

    It might be worth getting on to Incisor as I think he knows of a 2.6 ltre 6 pot
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« series 1 disco brakes | Foam filters »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!