Results 1 to 4 of 4

Thread: Headlight problem on Range Rover 4.6HSE

  1. 30th October 2006, 09:05 PM #1
    adr612 Guest

    Headlight problem on Range Rover 4.6HSE

    Hi, wondering if anyone has any ideas - the drivers parking/low and high beam won't work - dash says bulb failure but bulbs are fine. Does not appear to be any power getting to them (measured with Multimeter) The lights work fine at the back of the car on both sides when headlights are switched on. The passengers headlight, etc works fine. I had a boat trailer connected in weekend and all was fine then. But today (when getting pink slip :-( no go...
    Reply With Quote Reply With Quote
  2. 31st October 2006, 07:15 AM #2
    ladas's Avatar
    ladas
    ladas is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Kyabram, VIC 3620
    Posts
    2,544
    Total Downloaded
    0
    Quote Originally Posted by adr612
    Hi, wondering if anyone has any ideas - the drivers parking/low and high beam won't work - dash says bulb failure but bulbs are fine. Does not appear to be any power getting to them (measured with Multimeter) The lights work fine at the back of the car on both sides when headlights are switched on. The passengers headlight, etc works fine. I had a boat trailer connected in weekend and all was fine then. But today (when getting pink slip :-( no go...
    Silly thought - but have you checked the fuses. Not 100% sure but I feel sure that each side are supplied by seperate fuses. ie 1 fuse for the LHS and another for the RHS ?

    Ladas
    Reply With Quote Reply With Quote
  3. 31st October 2006, 07:54 AM #3
    adr612 Guest
    Ladas, I went through manual re fuses and there are none listed for Headlights (or even taillights) at all?? I wondered if it may be a solenoid but no info in manual re this..
    Reply With Quote Reply With Quote
  4. 31st October 2006, 08:13 AM #4
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    I'm sure the headlights are controlled through the BECM. Virtually everything else is.
    I think I'd be checking the outputs from that & make sure there is power actually going to the headlight.
    Scott
    Reply With Quote Reply With Quote
« 33" x 12.5 x15 coopers SST on Defender "130" | Not another tyre thread... »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!