Thread: Disco Air Con Lights

Totally wrong.........

You will, it seems have to remove the controller, then prise the front off - to replace the bulbs

You have to remove the radio head first - with 'special tool' - or if you have a filing cabinet with some suspension files in it, grab one - as the ends, with the grove in are perfect (once only as they bend) to remove the radio head

To get the controller out from memory is a complete bastard, you have to have four hands that rotate 360 Degs to depress the clips that hold the unit in - but with a bit of patience you will get it.

Thanks mate much apprecisted. Sounds like another one of those jobs.......

Originally Posted by ******

Thanks mate much apprecisted. Sounds like another one of those jobs.......

I recently fitted a dash pod, a little box neatly fashioned to fit the contours of the top of the D2 dash, and it alows you to add UHF radio's - cd players - or in my case a DVD player to keep the kids quite.

So with that I had to remove the radio head, and as I couldn't jiggle the wires through I also ended up removing the AC controller - is was a total git.......

but when I managed to release the clips it popped out like a new born, putting it back in was easy - line it up and push.

Once you have the controller out I am sure everything will be clear

Originally Posted by ******

Guys, I have an 03 disco with the usual split air con. Last night the light on the buttons that control this seemed to have stopped working. Well all of them except the lights on the drivers side temperature adjustment toggle which are still working.
Has anyone had this problem and is it a simple bulb replacement issue or does it have an underlying issue thet is likely to cost be a bucket load of cash?
If it is a bulb job some pointers on how to get to them to swap them out would also be greatly appreciated.

this happened to me recently, I got 2 bulbs replaced cost less than $20 all up. Did it as part of my service.

Cheers,