Thread: Where can I get one of these?

Looks like a boat/yacht fixing to me.

Like something to batten down a hatch......

Hey LandyAndy,

You'd want to be looking here.

I have a feeling one of the forum members posted this on the old website.

There goes the day, it's a big catalogue.

Cheers
Simon.

If you like any of the concept latches let me know, i work around the corner !

I am actually after some concept latches to put on the rear seats in the 130 instead of the solitary 6mm bolt each side.

When I made my Dual wheel carrier for a troupie in a former life i used over centre latches from Southco and they looked good and performed well too. Never popped open even once.

http://www.southco.com/product/class.aspx?cid=7383

Zwitter

maybe try UES; they've got all sorts of latches/locking mechanisms & have got offices in most capital cities

Originally Posted by zwitter

I am actually after some concept latches to put on the rear seats in the 130 instead of the solitary 6mm bolt each side.

When I made my Dual wheel carrier for a troupie in a former life i used over centre latches from Southco and they looked good and performed well too. Never popped open even once.

http://www.southco.com/product/class.aspx?cid=7383

Zwitter

Hi Zwitter,

I'd like to keep up with what you do on the 130 seats, mine doesn't have bolts or anything, and I could never find anything suitable to fit.

Cheers
Simon.

Originally Posted by LRHybrid100

G'day Guys,

I'm wanting to make my rear Rangie bar into one that can carry my spare wheel and so I am looking for some ideas on the latching mechanism.

I have this pix of one someone made from on here a while back:



Cheers

LRH

there over center locks ovesco up here in newcastle have all sorts includeing those ones im about to make up a rear bar 4 my rangie and tyer carrier and am going to use the same principal
cheers

chris

Cheers guys,

Looks like I'm going with a Ojop Fastener



and I think UES sell them

THX again