2nd battery d1

Quote:

---

Originally Posted by Tank

I will see if I can take some more Pics tomorrow, the fittigs are stormwater 90mm plastic elbows and a collar that 90mm waste water pipe goes through a floor, pics will describe it better, promise will post tomorrow, Regards Frank.

---

Cheers.....looking forward to it!;)

British 4wd sell a snorkle to suit your model for under $300.check here or on ebay.

Here is my setup,
http://www.aulro.com/afvb/showthread.php't=23386

Matt.

Quote:

---

Originally Posted by byron

Any possibility of a few more piccies of your set up? I've got the same engine and want a snorkle eventually.

Your set up would also give you a "Cold Air Induction" cold air pick up........taking air from other than inside the hot under bonnet area and behind/to side of hot radiator......this would give you better breathing and a bit more "free" power.;)

Have you any pics of just a little bit further forward?

What is that join from the Air Filter Housing to inner guard made up from?

---

Byron, I have put some pics in my Gallery. Go To Gallery (click) at top of page and click My Albums and search for Tank Disco Filter, I have been stuffing around all afternoon trying to get all of the pics I took (about 20) and ended up with 10 (besides the 4 that were already there). I suppose the rest are floating around in Cyberspace somewhere. I will try and post one up here in another post so as you can follow it back to the others. If you or anyone else wants PM me with your email address and I will email them to you, Regards Frank.

https://www.aulro.com/afvb/images/im...016/06/862.jpg

This is the longer shot showing the battery in position, I had to trim about 12mm of radiator bracket to fit this big mutha in, Regards Frank.

Here's a link to another forum on which I answered the same question.
http://www.landrovernet.com/forum/sh...hlight=Snorkel

The difference being my Disco is left hand drive and I fitted a mantec snorkel and not the Safari one.
Hope this also helps a little in your descision making.
There's pictures there also showing what I did to go into the original air box. You'll need to keep some flex between the AFM and the filter box or it will soon create fatigue and break away.

Regards.

S