Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 49

Thread: Cure (?) Leaking Power Steering Box

  1. 13th December 2006, 10:00 PM #11
    byron
    byron is offline Master
    Join Date
    Aug 2006
    Posts
    615
    Total Downloaded
    0

    Smile

    Quote Originally Posted by Bradtot
    Lucas oil is the same as Moreys engine oil stabilzer I have been using it since 1987 in all my Rangies and my power steering box has had one seal replaced in the bottom after 500k, pump is untouched
    I use it everywhere, my cv joints are original but I use 100% moreys in them always have. I am on original wheel bearings 520k on the clock now.
    the aftermarket repairers Rovertech, discovery autos ,british parts and service centre all use it and have done so for many many years.
    Does it work?
    I for one believe so and will continue to use it for years to come.
    My 10cents worth
    Brad
    mmmmmmm......interesting.....I thought that the Moreys bottles looked a lot like the Lucas ones.....is Morey's an Aussie brand or something?..........The yanks on the U.S. Land Rover and Range Rover websites speak very highly of Lucas products!....that's why I tried it and thought I'd share the info on here- coz I've had a few RR's and they ALL! had steering box leaks!......same info applies to the CV spheres.....

    Thanks, good to hear a "long term" usage report!, it ties in with what I read on the Yank websites!
    Reply With Quote Reply With Quote
  2. 13th December 2006, 10:06 PM #12
    byron
    byron is offline Master
    Join Date
    Aug 2006
    Posts
    615
    Total Downloaded
    0

    Wink

    Quote Originally Posted by Blknight.aus

    Those white metal bushes, are replaceable. its a full strip down job but even the most stubborn can usually be convinced apart in less than a day.
    Yeah but you'd have to be mad to replace them with the same!.......are there better bushes to be had?.....or is it "make 'em yourself"/have them made up situation?....or does anyone do rebuilds using a better bush?

    Those original design bushes are a very short term solution!
    Reply With Quote Reply With Quote
  3. 13th December 2006, 10:26 PM #13
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    I'll bet there are, go talk to a bearing/bushes specialist... although Id be thinking about puttin needle rollers in myself... Much easier.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  4. 13th December 2006, 10:29 PM #14
    byron
    byron is offline Master
    Join Date
    Aug 2006
    Posts
    615
    Total Downloaded
    0

    Smile

    Quote Originally Posted by Blknight.aus
    I'll bet there are, go talk to a bearing/bushes specialist... although Id be thinking about puttin needle rollers in myself... Much easier.
    I'm pretty certain that's what the upgraded "guaranteed not to leak for 5 years /100,000 miles" replacement ones in U.S. use

    I'd love to know if anyone in Oz makes em or sells em.....or is it an "order from over there" situation?
    Reply With Quote Reply With Quote
  5. 13th December 2006, 10:49 PM #15
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Some one get me a semi junker PAS box and I'll go and annoy a bearing guru...
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 13th December 2006, 10:55 PM #16
    byron
    byron is offline Master
    Join Date
    Aug 2006
    Posts
    615
    Total Downloaded
    0

    Talking

    Quote Originally Posted by Blknight.aus
    Some one get me a semi junker PAS box and I'll go and annoy a bearing guru...
    LOL ......go and see him on the Friday afternoon before the Xmas long weekend!
    Reply With Quote Reply With Quote
  7. 13th December 2006, 11:01 PM #17
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Quote Originally Posted by byron
    LOL ......go and see him on the Friday afternoon before the Xmas long weekend!
    10 minutes before knock off..
    And demand it be fitted.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  8. 13th December 2006, 11:05 PM #18
    byron
    byron is offline Master
    Join Date
    Aug 2006
    Posts
    615
    Total Downloaded
    0

    Talking

    Quote Originally Posted by Blknight.aus
    10 minutes before knock off..
    And demand it be fitted.
    Yeah......good one......you sound like a really nice fella........NOT!......lol

    Seriously though, this is such a coomon problem I'm really surprised that someone doesn't have a proper fix for it here in Oz like the improved version available in U.S........maybe there is and someone on this site might let us all know!
    Reply With Quote Reply With Quote
  9. 13th December 2006, 11:10 PM #19
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Im actually being serious on this If anyone on the forum has one, if you can get it too me I'll yank it and find the parts to mod it..

    I'll even consider sponsering the parts for the first one..Then I'll post up the howto with pics on the forum.


    3 things..

    1. It must be still working but leaking
    2. Dont expect it back in a hurry
    3. no guarentees
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  10. 13th December 2006, 11:22 PM #20
    rovercare's Avatar
    rovercare
    rovercare is offline OldBushie
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    You want a leaking 3 bolt or 4 bolt, i'll donate one, if you wan't to pick it up

    Just please stop killing all threads whining about autos
    Reply With Quote Reply With Quote
Page 2 of 5 FirstFirst 1234 ... LastLast
« D1 stripped tensioner pulley housing | LT230 Transfer Box re-build »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!