Results 1 to 10 of 10

Thread: Fuse blocks

  1. 18th December 2006, 10:19 AM #1
    matbor's Avatar
    matbor
    matbor is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Upwey, VIC
    Posts
    2,012
    Total Downloaded
    0

    Exclamation Fuse blocks

    Hi guys, wondering if anyone has seen any good 12v fuse blocks around, I am after the ones that have one input and say six outputs minimum. These are ideal for a dual battery setup and much neater than using some of the other fuse blocks around where by you need to daisy chain the cable/terminals.

    These are the ones I have found so far, (these are suggestions from drivesafe and p38arover, thanks guys) :

    Narva one (not sure on the $RRP or dimensions yet):

    54430
    6 Way Standard ATS Blade Fuse or
    Plug-In Type Circuit Breaker Block
    with Single Power In Terminal
    Amperage rating 25A per circuit at
    12V 150A max per block




    ATC FUSE BLOCK (kind of large for the number of outputs !!) :

    Designed for multiple hook-up of accessories, each with individual screw terminal outputs.
    Accepts up to six fuses.(Not included)
    Code AFB400
    http://www.wagner.net.au/Catalogue/02_21.pdf
    $RRP ? $15.95
    the dimensions ? 125 x 25 x 57 (mm)
    Max amp rating ? 30Amps


    Matt.
    Reply With Quote Reply With Quote
  2. 18th December 2006, 10:23 AM #2
    stusgonesailing's Avatar
    stusgonesailing
    stusgonesailing is offline Master
    Join Date
    Jan 1970
    Location
    Rockingham, Perth
    Posts
    164
    Total Downloaded
    0
    I,ve gotthe Narva one in the Defender. Works a treat
    Reply With Quote Reply With Quote
  3. 18th December 2006, 10:32 AM #3
    matbor's Avatar
    matbor
    matbor is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Upwey, VIC
    Posts
    2,012
    Total Downloaded
    0
    Quote Originally Posted by stusgonesailing
    I,ve gotthe Narva one in the Defender. Works a treat
    yeah probably go and get that one, just didn't like the idea of the screw terminal for the 12v, surpose you can cover it easily.



    here, just found some more, bit over the top for what i want.


    HL62941 Hella Water Proof 12 Gang ATC Fuse Block. Wires enter through a grommet on the side. This Relay Block features 2 buses, 1 with 8 fuse terminals 1 with 4. Includes Terminals.
    Fuses not included. 2" H x 2 1/2" W x 3" L
    Reply With Quote Reply With Quote
  4. 18th December 2006, 10:58 AM #4
    weeds's Avatar
    weeds
    weeds is offline Swaggie
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    http://www.springers.com.au/Products.aspx?ProductID=585



    brought one of these, sits under the rear seat, currently using four circuits, 1 x water pump, 2 x fridges and another aux outlet normally a light
    Reply With Quote Reply With Quote
  5. 18th December 2006, 11:00 AM #5
    matbor's Avatar
    matbor
    matbor is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Upwey, VIC
    Posts
    2,012
    Total Downloaded
    0
    One power input ? can't see in the pic sorry.
    Reply With Quote Reply With Quote
  6. 18th December 2006, 11:13 AM #6
    weeds's Avatar
    weeds
    weeds is offline Swaggie
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by matbor
    One power input ? can't see in the pic sorry.
    yep the terminal down the bottom, i think, pretty sure, i will pop down to the car and have a look and take a pic with the cover off
    Reply With Quote Reply With Quote
  7. 18th December 2006, 01:33 PM #7
    weeds's Avatar
    weeds
    weeds is offline Swaggie
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    yep one power in and one earth

    you will still need to tape the ends of the terminals up as they do protrude out from the plastic cover a bit 'something i must do' the screws have anti-vibration washers on them, they have never work loose on my setup
    Reply With Quote Reply With Quote
  8. 18th December 2006, 02:06 PM #8
    sschmez's Avatar
    sschmez
    sschmez is offline Wizard
    Join Date
    Jan 1970
    Location
    Bayswater North, Vic, 3153
    Posts
    1,048
    Total Downloaded
    0
    keep the ideas coming.....
    I'm also interested for my camper, the electrics there need some improvement and I found the same probs as Matt.

    Thanx all
    Stevo
    Reply With Quote Reply With Quote
  9. 18th December 2006, 06:02 PM #9
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Diesel Landcruisers have just the setup you are chasing under the bonnet,has 3 fused connections perm poss,acc and ign.Should be able to salvage one from a wrecker,quite a compact size,most tojo owners wouldnt know its there.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  10. 18th December 2006, 06:16 PM #10
    sclarke's Avatar
    sclarke
    sclarke is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    remember, cost should not be a key issue, buy cheap and it will fail....
    Reply With Quote Reply With Quote
« Load rating Thomas T86 winch | timing belt mistake »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!