Reply With QuoteI think you have to remove the axle shafts.
Surely it won't cost much more to add the seal to the job they are already doing.
Wizard
Hi All,
Do you have to remove the stub axle to remove the diff centre in the rear of a D1? Reason......I have a leak from between the stub axle and housing but the car is in at the mechanics on Thursday to have the diff checked. I will fix the leak myself if they will not have to touch this but if they are just going to pull it apart again there is no point fixing it myself. I want to save them time and me money so will fix the leak if they will not need to touch it.
Thanks Everyone
ChatterBox
I think you have to remove the axle shafts.
Surely it won't cost much more to add the seal to the job they are already doing.
Wizard
Yep, you have to draw the axles to remove the centre.
Dizzie, 08 D3 TDV6 SE
Wizard
Thanks. Wont waste my time doing it then
OldBushie
You don't have to drop the stubs, rotors or anything else, just withraw the axles so it will be extra work,
Master
no just take the axles outthen the diff will come out
ForumSage
As noted, to remove the diff centre they will have to drop the tailshaft off at the diff end and pull the axle half shafts clear of the centre. Then it is a simple case of undoing the nuts that hold the centre into the housing.
OldBushie
How did you manage to find this after nearly 4 years & then reply with the same answer as those above?Originally Posted by dragon2000
Just curious
Scott
Master
SupporterHow did you manage to find this after nearly 4 years & then reply with the same answer as those above?
Just curiouslove the old digs sometimes...... love you're reply more though
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks