Removing Radio from D1 Discovery

**Andrew** · 9th February 2007, 07:50 AM

Hi guys any hints as to how one removes the radio from D1 Discovery, is it a special tool from Rover or can I do it with a couple of bits of Coat Hanger. You know the 4 holes in the radio fascia.

Regards Andrew

**justinc** · 9th February 2007, 07:59 AM

I just use 4 split pins or similar bits of wire, push them all in and pull the Rad out.

JC

**Andrew** · 9th February 2007, 09:01 AM

Thankyou, I thought it was that simple

**Pedro_The_Swift** · 9th February 2007, 09:27 AM

putting one back in is the trick,,

very congested and HOT in there,,

**Diff** · 9th February 2007, 09:51 AM

4 50MM NAILS DO THE TRICK. putting it back in taks a bit of a wobble to get the wires out of the road and the clips to lock. I put a piece of timber under the radio to support its weight because after a while it will crack the plactic face.

**loanrangie** · 9th February 2007, 09:59 AM

Originally Posted by Pedro_The_Swift

putting one back in is the trick,,

very congested and HOT in there,,

Mine slides in/ out no problems and there is heaps of space behind, there is a clip that holds a rubber grommet that fits on the back of the stereo that supports it.

**Andrew** · 9th February 2007, 08:03 PM

I want to put in a pioneer unitin, so with a bit of swearing I m sure it will go in

**Pedro_The_Swift** · 10th February 2007, 05:46 AM

do a quick length measurement,
my alpine was 25mm longer than the special rossi radio (remember swizel sticks?

) I took out,,

and if your planning to go off road,, nows the time to buy an fm spring steel aeriel to go on the bullbar.

Thread: Removing Radio from D1 Discovery

Thread Tools

Removing Radio from D1 Discovery

Bookmarks

Bookmarks

Posting Permissions