Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: TD5 injector harness

  1. 11th February 2007, 05:25 PM #11
    ladas's Avatar
    ladas
    ladas is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Kyabram, VIC 3620
    Posts
    2,544
    Total Downloaded
    0
    Quote Originally Posted by crump View Post
    yeh, I'm not explaining myself well as I know nothing, the plug out of the rocker cover joins the main harness somewhere I assume, what I'm trying to ascertain is how far the oil has already travelled. Is there a connector from the wires out of the rocker somewhere before the ECU as if that connection is oil free I have some idea of how far its travelled???
    There is no connector between the rocker connector and the ECU

    The measurements of the box is as follows

    130 mm wide/long

    75 mm deep

    50 mm high (excluding drain stub, and fitting screws)

    75 mm high (including drain stub and fitting screws)
    Reply With Quote Reply With Quote
  2. 11th February 2007, 05:26 PM #12
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    there are 3 connections in the ecu-injectors harness....


    1. ecu-harness main (the one under the seat in the deefer)
    2. harness main-head harness (the on on the front of the head)
    3. head harness-injector (remove the rocker cover to see)

    first place to check is the plug on the front of the head (if its here the problem has started)

    second is the ECU (if its here your in danger of problems arising)
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 11th February 2007, 05:48 PM #13
    crump's Avatar
    crump
    crump is offline ChatterBox Subscriber
    Join Date
    Jan 1970
    Location
    Eidsvold QLD
    Posts
    2,691
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    there are 3 connections in the ecu-injectors harness....


    1. ecu-harness main (the one under the seat in the deefer)
    2. harness main-head harness (the on on the front of the head)
    3. head harness-injector (remove the rocker cover to see)

    first place to check is the plug on the front of the head (if its here the problem has started)

    second is the ECU (if its here your in danger of problems arising)
    ok, that clears it up, so if I've got oil at the rocker plug and not at the ECU(which I dont) I should give it the metho treatment.
    The Ugly Duckling-
    03 Defender Xtreme, now reduced by 30%.


    a master of invisibleness.
    Reply With Quote Reply With Quote
  4. 11th February 2007, 06:21 PM #14
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    hrmmmm... Id put the jury as out on that one...

    I personally would probabley not, Installing a fix should stop it getting to the ECU, washing it down with metho might speed up the problem as you willbe washing the the gunk towards the ecu end...

    If you had it at both ends then Id be doing the wash thing and installing some kind of fix.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« Radius Arm Bushes | Range Rover lift + tyres »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!