Results 1 to 7 of 7

Thread: Light tractor

  1. 15th April 2007, 06:46 PM #1
    Lyall Guest

    Light tractor

    Hi
    I am hoping someone can help me in my quest to convert a retired Land Rover into a light tractor. I will be using the engine, gearbox, transfer case, rear diff and PTO. Any help, ideas, offers of a suitable vehicle or parts appreciated. I am based in western Victoria.
    Lyall
    Reply With Quote Reply With Quote
  2. 15th April 2007, 06:56 PM #2
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Hi Mate,and welcome.
    Any series Landy,ie the leaf sprung models will do it.The factory pto is fairly rare,they had the option of hydraulics and a rear shaft drive.
    With a hydraulic pump and the rear pto shaft and a three point linkage fitted to a ute with a set of 7.50x16 tractor tyres you would have quite a hobby farmers warhorse!!!!!
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  3. 15th April 2007, 07:12 PM #3
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,519
    Total Downloaded
    0
    No conversion required. The swb Series Landrover was designed from the ground up as a light tractor (80" even came as standard with a toolbar).

    More useful with the rear PTO fitted and with a governor. Also recommended is the fitting of the optional governor, although probably not needed with the diesel.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  4. 15th April 2007, 07:47 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    ditto and most with the mechanical winch on the front have the chain side drive pto on the back of the tcase which has the pto to drive the rear, you just need to grab almost any tractor PTO mount and put it on the back.

    Good for pto drive, not so good for pulling or slow speed mobile pto work as the mechanical drive is related to road speed.

    But to do it hydraulically of a double belt front pully is a better bet.

    Depends on if you want to go with "as designed" or "what owrks best now"
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  5. 16th April 2007, 03:10 PM #5
    vnx205's Avatar
    vnx205
    vnx205 is offline ForumSage Supporter
    Join Date
    Jul 2006
    Location
    Tumbi Umbi, Central Coast, NSW
    Posts
    5,768
    Total Downloaded
    0
    I don't have any practical suggestions, but you might be encouraged to follow the advice in the posts above by my brother-in-law's recollections about a Series I LWB used as a tractor.
    When he was very young just after WWII, his father had a soldier settler block north of Narrabri. They had no money for a tractor so had to use the SI to do all the ploughing etc for wheat crops. As he remembers it, the only modification was to the suspension. They had to put so much weight in the back to get enough traction that the suspension completely bottomed out and they deemed it necessary to fit wooden blocks above the axle to keep it up at somewhere near standard height.
    So it seems the LR makes a pretty useful tractor.

    1973 Series III LWB 1983 - 2006
    1998 300 Tdi Defender Trayback 2006 - often fitted with a Trayon slide-on camper.
    Reply With Quote Reply With Quote
  6. 16th April 2007, 03:50 PM #6
    BigJon's Avatar
    BigJon
    BigJon is offline ForumSage
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Quote Originally Posted by vnx205 View Post
    they deemed it necessary to fit wooden blocks above the axle to keep it up at somewhere near standard height.
    Not quite the same as the Morris / Austin "Floats on Fluid"!
    Reply With Quote Reply With Quote
  7. 16th April 2007, 06:53 PM #7
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,519
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    ditto and most with the mechanical winch on the front have the chain side drive pto on the back of the tcase which has the pto to drive the rear, you just need to grab almost any tractor PTO mount and put it on the back.
    .......
    See my post in marketplace alerts - I found a rear PTO yesterday.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« What coil to use with an early V8 electronic distributor? | Center Diff Lock »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!