Results 1 to 4 of 4

Thread: radius arm part numbers

  1. 28th April 2007, 10:46 AM #1
    weeds's Avatar
    weeds
    weeds is offline Swaggie
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0

    radius arm part numbers

    i picked up a set of radius arms the other day however they have different part numbers on them, they look identical when sitting sde by side

    will they fit my 110???? i have pressed to old bushes out

    part numbers
    HRC2435
    HRC1198
    Reply With Quote Reply With Quote
  2. 28th April 2007, 11:34 AM #2
    ladas's Avatar
    ladas
    ladas is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Kyabram, VIC 3620
    Posts
    2,544
    Total Downloaded
    0
    The only part numbers I can find for a 110 are

    NTC 2705 (< KA 930455)

    NTC 7331 (> LA 930456)

    Doubt if that helps at all
    Reply With Quote Reply With Quote
  3. 28th April 2007, 02:41 PM #3
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    mine are L/RHRC435SRD17???
    2004 90..

    the only differance i know of was the width of the bushes, one was 50mm?? and the other was 55mm??

    cheers phil
    Reply With Quote Reply With Quote
  4. 28th April 2007, 04:04 PM #4
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Hi Kelvin,

    Disco and Rangie ones will fit, only post 1988 Rangie though. The bush thickness is the only concern, any casting extras like for EAS brackets etc are of no conseuence. As long as they are the thicker ones from later Rangie and All discos except D2 They will fit. I have a feeling early 110 county have different again, like the thick diff end bushes but smaller chassis mounting bush I.D.? anyone confirm this?

    JC
    Reply With Quote Reply With Quote
« Replacing a 4sp with a 5sp gearbox? | Why do all the good LRs end up in car yards »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!