Thread: warn high mount

Originally Posted by rovercare

That will be handy when you straighten out/bend the crush cans on Airbag suitable bars wont it

Ok Am i the only one or
If you have an ARB bumper on a D2 which is ok for the air bag.
It should not give a sh*t what winch you have in it for the airbags to still work.Or are the crush cans for the air bags snobs and only like certain winches

Originally Posted by rovercare

I take it that you've never actually lifted a highmount with cable on it

Either that or your a big strong ****er

I mean they can be lifted, but getting one out the car, dragging it up the muddy hill, attaching to the front.........

I did my back in and was moving around on all fours after lifting the bumper and high mount (together ) onto the front of my 90 on my own.. And it had no cable on at the time (i had plasma and it was in the washing machine at the time)

Originally Posted by Reads90

Ok Am i the only one or
If you have an ARB bumper on a D2 which is ok for the air bag.
It should not give a sh*t what winch you have in it for the airbags to still work.Or are the crush cans for the air bags snobs and only like certain winches

Only worked with D1 airbag compatible bars and they have a cradle to house a low mount winch, fits between the chassis rails (similar to what I've made for better approach angle, for RR's with low mounts) and doesn't effect the cans, but If bolted directly to the front, which a high mount has to, the little cans hetween the bar and chassis rails will bend out of shape, D2's dont have crush can's????

Originally Posted by rovercare

, D2's dont have crush can's????

So as this is going on a d2 then, no problems as they don't have crush cans