Not sure where the switch is as was dark when i last looked
The car goes back to the stealer next week again for the same thing
Better get fixed this time or i might have to get rid of it
Cheers Gavin
Master
SupporterIs your horn worrking okay? My cruise control didn't work on my 97 Disco - it was one of the faults I got sorted the other week.
The horn didn't work either. It only sounded when I pressed the Set button on the steering wheel when the cruise control master switch was off. When the master switch was on, the horn didn't work at all.
In the end there were several faults all connected with the steering casette being ****ered so the whole thing had to be replaced.
2012 Discovery 4 SDV6 HSE
2003 Discovery 2 TD5
2003 Defender Xtreme
1997 Discovery V8i
There is 2 switches 1 for cruise 1 for brake. Remove cruise switch. To adjust the switch pull button all the way out and then put it back in the brake pedal and that will auto adjust the distance make you hold the pedal down when refitting switch.
Thats what a Landrover mechanic told me to do.
Paul
Cynical Moi?
Not sure about that. The WM shows the switches as being screwed in & they could be adjusted in increments. In reality, mine are clipped in & there is no adjustment.
I also have two pedal switches being a manual.
ChatterBox
Originally Posted by Milton477
See attached
Last edited by ladas; 22nd October 2008 at 09:46 PM.
ChatterBox
On D2's auto there is just one switch on the brake pedal that does cruise and brake lights.
On a manual - there is one on the brake and one on the clutch
Thanks Sniegy, it was the hose to the vac pump. i was burnt from the exaust heat. I have now wraped it in a reflective tape.
I went outto test it and good as new.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks