Page 1 of 7 123 ... LastLast
Results 1 to 10 of 70

Thread: yes.. another oil in harness thread....

  1. #1
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0

    yes.. another oil in harness thread....

    Hi Guys.. i have searched and read pretty much all of the threads i can find.. but is there anywhere on here that defines what parts you actually need to replace the injector harness? do i need any gaskets / seals etc ... is there a specific way to do something that helps prevent the ingress again? etc etc etc.. i have the rave manual, and it looks fairly straight forward, i am planning also to flush the main harness (as the oil reached the red plug!)

    the next definitive thing... is where to get the bits from (im based in perth, but dont mind internet ordering at all)

    Thanks in advance as usual

    Steve

  2. #2
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    If you can successfully clean the harness to the ECU, then you just need to replace the injector harness.
    You might get away with re-using the rubber gasket if you're careful & use a bit of sealant on the half moon areas.
    Scott

  3. #3
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    im planning on not replacing the main harness (im assuming that big $$ and time) so i will flush it out as suggested by a few yesterday.. but will buy the injector harness

    im not too fussed about buying a new gasket if i need to.. i'd rather that than a leaky rocker cover!

    so next question.. where do i buy the 2 from? and do i need orings?

    Thanks

    Steve

  4. #4
    Join Date
    Apr 2007
    Location
    I am lost
    Posts
    1,766
    Total Downloaded
    0
    karkraft deliver to your door

  5. #5
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    do they do the gaskets too?

    thanks for the help yesterday too

    Steve

  6. #6
    Join Date
    Apr 2007
    Location
    I am lost
    Posts
    1,766
    Total Downloaded
    0
    when you say injector harness ?????????'thats the bit from inside engine to the outside plug [roundish].....is that correct...........not the entire lengh to the ecu

  7. #7
    Join Date
    Apr 2007
    Location
    I am lost
    Posts
    1,766
    Total Downloaded
    0
    yep .....if it was not for landyandy helping me i would not have been able to help you thats why i love this forum

  8. #8
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    thats correct discothrasher.. just the harness inside the engine..

    and then 5 litres of meths from bunnings

    thanks

    Steve

  9. #9
    Join Date
    Apr 2007
    Location
    I am lost
    Posts
    1,766
    Total Downloaded
    0
    cheers ......i have going ar mine for about 1.5 weeks no and looking promising make sure you reconnect then drive it and do it over .over ,over [i find the garden spray bottles work the best ]

  10. #10
    Join Date
    Apr 2007
    Location
    I am lost
    Posts
    1,766
    Total Downloaded
    0
    just got off the phone with karkraft it will cost ya $which is cheaper than what i thought
    Last edited by incisor; 14th May 2007 at 03:43 PM. Reason: DONT QUOTE KARKRAFT PRICING ON THE SITE!

Page 1 of 7 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!