Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Non-original motors

  1. #11
    Join Date
    Sep 2006
    Location
    Northern Beaches
    Posts
    1,426
    Total Downloaded
    0
    I had a 2A with a 202 and one with a gas 186, the 202 would cruise at 110-120 and still had enough in reserve to overtake, it was a very healthy 202 but the noise was excessive even with a Fairey overdrive. I didn't want to lose my low range ability so didn't want to do the high ratio diffs, but if I did a lot of miles I might have thought different. Fuel consumption was 10-14 mpg or 20-22 if you drove at 80-90kmh.

    The gas 186 was in a wagon so probably heavier in the body and the motor was very tired. It would struggle to get to 100 but got 14mpg on either gas or petrol. I was going to put the 202 in the wagon and have the best of both worlds, but borrowed some money and bought a new Defender.

    Although the Defender is nice it is a lot of money and the gas motor was cheaper to run at the time. I think the 2A with the 202 would be good, if you wear it out they are easy to recondition or pick one up from a rusty Holden. You could fit a yella terra head or similar for better performance . For not a lot of money you could make it nice to drive, make it quieter and you can make them steer nicely. They don't always have to have half a turn of play in the steering just because thats what most have.


    Jeff

  2. #12
    Join Date
    Jan 1970
    Location
    Ipswich QLD.
    Posts
    1,785
    Total Downloaded
    0
    [quote=Jeff;546837]was a very healthy 202 but the noise was excessive even with a Fairey overdrive.

    Thats probably why the noise was excessive. (The Fairey Overdrive that is.)

    Cheers, Mick.
    1968 SIIa SWB
    1978 SIII Game SWB
    2002 130 Crew Cab HCPU

  3. #13
    Join Date
    Sep 2006
    Location
    Northern Beaches
    Posts
    1,426
    Total Downloaded
    0
    No the Fairey was not that noisy, it did whine a bit but the revs of the motor in an unlined hardtop made more. When I got the wagon with headlining and door trims it was surprising how much quieter it was, I don't think I could go back. The noisiest was when I had a ute top on, it was like being in a Hercules!

    Jeff


  4. #14
    Join Date
    Jan 1970
    Location
    Christchurch NZ
    Posts
    1,164
    Total Downloaded
    0
    I've had 2 Nissan LD28 powered series 3's and found it to be an excellent conversion. 6 cylinders so no probs with gearboxes, they love the std gear ratios so no need to fit overdrives or high ratio diffs and give a top speed of 150 kmh. They will pull 6000 rpm no problem, so sitting on 4000 at 100 kmh is no problem yet have more torque at low rpm's than my TDI. they are the diesel version of the nissan 280z motor.
    1995 Defender 110 300TDI :D
    1954 86" Series 1 Automatic :eek:
    Ex '66 109" flat deck, '82 109" 3 door, '89 110 CSW V8, '74 Range Rover, '66 88" soft top, '78 88" soft top, '95 Disco ES V8, '88 Surf, '90 Surf, '84 V8 Surf, '91 Vitara.

  5. #15
    Join Date
    Jul 2006
    Location
    Toowoomba, Queensland
    Posts
    1,863
    Total Downloaded
    0
    Quote Originally Posted by jimbo110 View Post
    I've had 2 Nissan LD28 powered series 3's and found it to be an excellent conversion. 6 cylinders so no probs with gearboxes, they love the std gear ratios so no need to fit overdrives or high ratio diffs and give a top speed of 150 kmh. They will pull 6000 rpm no problem, so sitting on 4000 at 100 kmh is no problem yet have more torque at low rpm's than my TDI. they are the diesel version of the nissan 280z motor.
    That sounds good, Jimbo. A couple of questions - what are they out of? And do you know where the conversion kits were from?

    I haven't heard of this conversion - is it a NZ special?
    Steve

    2003 Discovery 2a
    In better care:
    1992 Defender
    1963 Series IIa Ambulance
    1977 Series III Ex-Army
    1988 County V8
    1981 V8 Series 3 "Stage 1"
    REMLR No. 215

  6. #16
    Join Date
    Jan 1970
    Location
    Christchurch NZ
    Posts
    1,164
    Total Downloaded
    0
    Quote Originally Posted by scrambler View Post
    That sounds good, Jimbo. A couple of questions - what are they out of? And do you know where the conversion kits were from?

    I haven't heard of this conversion - is it a NZ special?
    They are mostly out of nissan Laurels, the older LD28 is much better than the RD28 that replaced it. Not just a kiwi thing, the place in the UK selling the 6.2 chev V8 diesels also sold them. They sell here on Trade me for around $300-$500 with the conversion adaptor for landrover, sometimes the adaptor comes up for sale at around $50.

    http://www.trademe.co.nz/Trade-Me-Mo...981147.htm?p=1


    http://www.trademe.co.nz/Trade-Me-Mo...268718.htm?p=4

    http://www.trademe.co.nz/Trade-Me-Mo...157876.htm?p=2

    http://www.trademe.co.nz/Trade-Me-Mo...34803.htm?p=18

    Its a very popular conversion, there are 3 LD28 powered land rovers on trade me at the moment.
    1995 Defender 110 300TDI :D
    1954 86" Series 1 Automatic :eek:
    Ex '66 109" flat deck, '82 109" 3 door, '89 110 CSW V8, '74 Range Rover, '66 88" soft top, '78 88" soft top, '95 Disco ES V8, '88 Surf, '90 Surf, '84 V8 Surf, '91 Vitara.

  7. #17
    Join Date
    Jan 1970
    Location
    Toowoomba QLD
    Posts
    1,132
    Total Downloaded
    0
    I firmly believe a High Ratio transfer conversion is the best option with a Holden conversion rather than o/d or RR diffs. You keep a decent low range and they are relatively quiet and reliable. Mine would cruise comfortably on 110 - it was a very driveable vehicle.

    That said, IMHO, I dont believe any Series LR is going to be an ideal touring vehicle. Its always going to be a noisy, hot or cold, rough riding, heavy steeering truck with poor ergonomics and minimal (none) safety features, even with a lot of money spent on it. I would get a Tdi Defender or similar for the touring vehicle and keep a Series (or two!) for other purposes............

  8. #18
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,972
    Total Downloaded
    0
    Quote Originally Posted by mark2 View Post
    ...That said, IMHO, I dont believe any Series LR is going to be an ideal touring vehicle. Its always going to be a noisy, hot or cold, rough riding, heavy steeering truck with poor ergonomics and minimal (none) safety features, even with a lot of money spent on it. I would get a Tdi Defender or similar for the touring vehicle and keep a Series (or two!) for other purposes............
    I've driven my SIII thoughout the Kimberley, Melbourne to Darwin afew times, done the Simpson & Central Aus as well as shorter touring around Vic.

    I found the SIII to be an easier vehicle to live with off road than the Range Rover, though the RR was faster, smoother, quieter. Driving the SIII was a pleasure (& adventure), but it's a totally different style of driving.

    After last years Simpson Trip (SIII & Defender), I decided it was time to get a Defender. One of the problems with touring with an older vehicle, is that the pace & style of travel is so vastly different. In by gone years everyone crawled under their cars at the end of the day and checked oil levels or tightened stuff. New cars require a lot less maintenance, so if you're touring with newer vehicles, it's an incompatible style of travel. I'd be in overalls under the SIII while everyone else was having a cold beer around the fire.

    Provided you tour with the mindset that the series landy will require more attention than a newer landy, I think you can still enjoy the adventure. And it adds a lot of character to your photos & stories.

  9. #19
    Join Date
    Jan 1970
    Location
    Goolwa SA - but top ender forever
    Posts
    2,515
    Total Downloaded
    0
    Now the new 3.6 TDV8 out of the new rangie would make a hoot of a hybrid engine for the series.

    Shame the engine would cost more than the rest of the finished vehicle

    Blythe

    P.S. I really want one for my Disco then rip the body off and a tray back series III body on top then.........

  10. #20
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,145
    Total Downloaded
    99.87 MB
    Quote Originally Posted by jimbo110 View Post
    I've had 2 Nissan LD28 powered series 3's and found it to be an excellent conversion. 6 cylinders so no probs with gearboxes, they love the std gear ratios so no need to fit overdrives or high ratio diffs and give a top speed of 150 kmh. They will pull 6000 rpm no problem, so sitting on 4000 at 100 kmh is no problem yet have more torque at low rpm's than my TDI. they are the diesel version of the nissan 280z motor.
    With this conversion, I take it the LD28 bolts up to the series gearboxs, or does the series tranfer bolt onto the LD28's gearbox?
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!