Results 1 to 6 of 6

Thread: D110 - whats are the factory spring rates & lenghts?

  1. 13th June 2007, 08:21 PM #1
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0

    D110 - whats are the factory spring rates & lenghts?

    G'day Guys,

    For a 2002 MY D110 - whats are the factory spring rates & lenghts?

    I want to upgrade the fronts, so want to know what is factory first - want to get rid of that IFS look

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
  2. 14th June 2007, 11:10 AM #2
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    http://members.shaw.ca/jbarge/springinfo.html
    Reply With Quote Reply With Quote
  3. 14th June 2007, 11:31 AM #3
    Barra1's Avatar
    Barra1
    Barra1 is offline Wizard Subscriber
    Join Date
    May 2007
    Location
    Albury, NSW
    Posts
    1,197
    Total Downloaded
    0
    I don't know the heights etc. but the front springs below levelled the vehicle perfectly.

    R*NRC9449 - Spring-Front-LH
    R*NRC9448 - Spring-Front-RH

    These were suggested to me by a LROCV member - and they have worked a treat. The vehicle rides very well - (no winch fitted).
    http://i271.photobucket.com/albums/j...KevsAvatar.jpg
    Defender '06 - (+ Tombie's Magic)
    Gone but not forgotten
    Defender 03 (Rolled)
    '99 TDI Discovery
    '96 V8 Discovery
    '86 V8 County (Life's regret selling this)
    Series III
    Reply With Quote Reply With Quote
  4. 16th June 2007, 03:30 PM #4
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    Look like the D90 rears !!!

    NRC9448 D90 Rear 15.31" 225Lbs 8 Coils blue/red
    NRC9449 D90 Rear 14.80" 225Lbs 8 Coils yellow/white

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
  5. 16th June 2007, 09:44 PM #5
    westy's Avatar
    westy
    westy is offline Fossicker
    Join Date
    Jan 1970
    Location
    Seaford Vic
    Posts
    52
    Total Downloaded
    0
    I have a TD5 Extreme and put 1976 rangy rear springs in place of my front springs and this brought the vehicle perfectly level.
    Ps I also have a winch fitted.
    Reply With Quote Reply With Quote
  6. 24th June 2007, 05:57 PM #6
    sclarke's Avatar
    sclarke
    sclarke is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    OK Bump Stop height on my Fender with a Winch and Bar and springs are the LR NRC9448 NRC9449

    Measured today on a fairly flat surface it is about 100mm give or take 2mm

    Steve
    Reply With Quote Reply With Quote
« what does it do. | Diff & Propshaft play »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!