what happened to the TD5 ???
and where are you located ...........
well finely got a quote to fix my td5 engine $8 to $10 grand
no f@#kin way i'm going to spend that on a rebuild..
so whats my options????? thinking about getting a damaged
disco & putting a V8 & auto in it.. its a 130 extracab defender..
great work car so i dont want to get rid of it..
and i'm over diesels after this exersize too costly to repair..
if anyone has any other ideas let me know !!!!
Jeff
what happened to the TD5 ???
and where are you located ...........
130's rule
You can get a complete motor for $6k ish from certain Landy Wreckers
$10k for a rebuild? Jeez!
I'd be sticking a new HS2.8 in it for that money....but I don't know if they're a straight drop-in on a TD5 like they are on a 300TDi.
Jeff
1994 300TDi Defender
2010 TDV8 RRS
There was a TD5 engine on fleabay a little while ago for $4500, dunno if its still there....
I got a mate who got ripped off $13K for a Nissan 3 litre diesel rebuild, and that's for an old shaped Nissan (sorry I don't know Nissan models).
V8 with auto does sound good, unless you can find a rolled D3 and get a TDV6 with 6 Speed auto.
I could believe $8k to do a full blown rebuild on a td5, assuming that its a tow in drive away rebuild that your after. Basing my charge rates on what the ADF quotes manhours for on NFW-member to pay work and my parts from the www.lanrdovers.com.au catalog
to remove a Td5 from a defender (havent even looked at a disco one yet (shudder) would take me about 6-8 hours doing it all properly and then that and a bit more to get it back in. Including the routine consumables that go with removing and installing an engine that could blow out the first 1.5-2k
no way known Im going to let you put any of the following back on an engine IVe just rebuilt without having them cleaned tested and rebuilt to next door to perfection. Turbo, radiator, intercooler, doing up each one of them is easily 8 hours worth in total so theres another 800 down the tube. chuck in some more consuables, flushers cleaners, disposal of contaminated coolant/flush and theres another grand gone. And I still havent pulled the head off.
so I get the head off, theres a heap of consumables gone, new gaskets to put in, and lets just say that it only needs a quick plane down and your valves and guides are all perfect, $750 done. but oh wait, and injectors out of spec and needs replacing theres $1200 minimum gone over and above the $750 to get the head work done.
Im not even halfway through doing the work yet and already thats pretty close to $5k gone.
new bearings, new fuel pressure regulator, new oil cooler, new fuel cooler, replacement hoses, pistons and rings, timing chain, cam, timing chain tensioner,con rods, crank? reworking the block....
Assuming the guy KNOWS what hes doing, Does what he claims $10 for a tow in drive out engine rebuild on a TD5 assuming about a 40% parts replacement isnt too bad.. Just for fun I speced out the parts only to do a TD5 from go to whoa replacing everything and I cleared $10k.
For an engine out job with minimum parts, id be raising my eyebrows at any opening "soft" quote of more than $5k.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Yep that sounds about right.
I was quoted 6-10 grand. Up to 16 grand if major damage is found once it was stripped. Cost me $4500 with me doing the strip down, cleaning and reassembly. Specialists did the machining type work. Rest went in parts.
What has happened to it? and Where are you?
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks