Thread: Discovery Bullbar

From what I understand, I do not think the bullbar will fit on the Disco.

Great vehicle. There are a few chaps who know a great deal about your particular type of vehicle and they will all try to assist where they can.

Have a look at this

Maybe of some use

http://www.aulro.com/apc/showproduct...uct=941&cat=25

no difinately wont fit needs to be air bag compatible i think th only companies doing them are tjm arb
i own a 00 td5 disco great vechicle with reg servicing a 2 inch lift and bigger tyres very capable off road the 99 has the cdl which is a bonus,i would be checking your loom running to your computor from engine for oil build up it can course some trouble
otherwise you have bought a top fourby ,welcome to aulro there is enough knowledge here to run land rover and make it better
from kelvin

If you were wondering what extra bits are involved in airbag bulllbars, a pic of a D2 chassis section from the Markets section ( Accessories - D2 recovery points by ladas) may help

http://www.aulro.com/apc/showproduct...duct=944&cat=6

In the third pic, you see the recovery hook fixed to the front of the chassis rails just like most other D1,Rangie stuff. You can also see the aluminium box also attached to the chassis rail ( It has a R on it ). You should already have these on your D2 - and they are where the newer bull bars bolt onto, not the chassis rails (as such). D2's, having airbags as standard, required those crush cans - find a bullbar that has those fittings and you are set.