Results 1 to 9 of 9

Thread: oil pressure

  1. 28th June 2007, 08:05 PM #1
    kopcar Guest

    oil pressure

    just put in a new cam,and head gaskets.timing chain and gears plus lifters in my 1987 3.5 efi range rover but i now have no oil pressure yes there is oil in the engine plus the oil pump was primed before starting but no oil discharging out of pump even with the oil pressure sensor unscrewed from oil pump
    Reply With Quote Reply With Quote
  2. 28th June 2007, 08:14 PM #2
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is online now The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0
    Welcome to AULRO kopcar

    try here---
    http://www.aulro.com/afvb/showthread...ight=prime+oil
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  3. 28th June 2007, 08:25 PM #3
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Primed? Did you jam that oil pump with Vas
    Reply With Quote Reply With Quote
  4. 28th June 2007, 08:36 PM #4
    kopcar Guest
    i have packed the oil pump with petrolem jelly but no go
    Reply With Quote Reply With Quote
  5. 28th June 2007, 09:17 PM #5
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,503
    Total Downloaded
    0
    lines ok, filter full, pressure regulaotr not stuck open?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 29th June 2007, 07:13 AM #6
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    I had the same problem when I did my cam a few years ago.
    It was my fault really, I was supplied a later timing cover gasket which has the oil gallery hole in a slightly different spot. As a result, the gasket wasn't sealing around the gallery & the pump was sucking air from outside instead of oil from the sump.

    Unfortunately, I didn't realise the later engines had a different gasket & it took a few nights to sort out what was going on. Now I check the gaskets are lining up correctly.


    Maybe you don't have the same problem but it's worth checking if nothing else works out.
    Scott
    Reply With Quote Reply With Quote
  7. 29th June 2007, 02:57 PM #7
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    You didn't by any chance put a late model cam in without the skew gear for the dizzy?
    Did the engine start?

    Regards Philip A
    Reply With Quote Reply With Quote
  8. 3rd July 2007, 09:45 PM #8
    kopcar Guest
    the engine had low pressure at idle (light on)but above idle light goes out changed engine oil now no oil pressure at idle or above idle
    Reply With Quote Reply With Quote
  9. 3rd July 2007, 10:14 PM #9
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,503
    Total Downloaded
    0
    sounds to me like the oil pump or oil pump drive has failed... pull it down to investigate, unless youve forgotten to install the oil filter, which given the run of stupid things Ive seen lately I cant discount as a possability... (nothing personal)
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« Gear selector sensor switch | RRC Steering box seal »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!