Thread: S3 hartop roof to 110

are you trying to fit a series 3 roof to a coil sprung 110?
if so the front might give you trouble for the windscreen.

ummm...see your point 109..the flat S3 screen....

I seem to recall reading somewhere the 110 windscreen is higher

S3 roof will not fit the Fender screen.
the Fender screen is Higher

I went down that route when i converted Grommet from a Hard top to a Ute....

you can use the s3 roof. But you pretty much must use the s3 windscreen. This can be ok if you are not a giant and you want an across the front roof console. A mate used a s3 ute cab for his 110 (1987).

I would use a 110 roof. A cheap paint solution for the 110 roof would be powder coating. I would take all the 2pac off with stripper first rather than bead blast it. Alternatively a shop should only charge about $600 to 2 pac it.