Thread: door keeps jamming

in mine the plastic clips that hold the rods had cracked and the rods were slopping about preventing the handle from having enough movement to make the door lock unlatch past the second stop.

After a bad day a little bit too much of the heave ho saw the handle come away in my hand....

3 hours worth of milling+grinding and a trip to the wreckers saw me having a solid steel handle instead of cast ally and metal clips in place of the plastic on the linkages, SFAIK its still working, The bloke who owns it tennants my house in townsville and hasnt complained yet.

open the door a little bit then lift it up by holding it at the rear, works for me.

Just fixed mine tonite there is a rod that clips into the back of the outer door handle and on the other end the rod is threaded turn the rod clockwise to shorten it by a couple of turns.It worked for me zacc

I had a similar problem. A linkage adjustment has fixed it (so far!).

Same here, what cazzzzzzzzzzzzzzzzzz said
my mate in sydney had the same prob with his d2, dealers couldn;t fix it, he fiddled with it himself.
showed me what the cause was, I went a bit hard, went for 5 turns, opens so easily now.


john

Yup, I'll get back to you as soon as i sus it.

GQ

Yeah thats what i did, i adjusted the linkage about 5 turns on the rod going down from the external handle, worked fine for a couple of go's, and now it wont open at all!!

Its very hard to get the trim off and undo the bolts holding the external door handle when you cant even open the door! Im gettin very frustrated with it. What are some possible reasons the door wont open at all now?? Maybe i adjusted it too much?