Results 1 to 5 of 5

Thread: squeling carbie

  1. 11th August 2007, 07:42 PM #1
    easo's Avatar
    easo
    easo is offline YarnMaster
    Join Date
    Dec 2006
    Location
    Sunny Pucka
    Posts
    3,138
    Total Downloaded
    0

    squeling carbie

    G'day all, the 'Old Girl' has not been run in about 6 weeks due to work commitments, however started it today and had a squell comming from under the lid. Did some investigating and narrowed it down to the carbie. I think. I thought it was the distributer but the squell pitch changed when I applyed pressure to the carbie.

    Would I need to rebuild/replace the carbie?

    How much approx?

    How do I convince the wifiey?

    Cheers Easo
    Reply With Quote Reply With Quote
  2. 11th August 2007, 08:07 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,496
    Total Downloaded
    0
    leaking gasket, DIY, $ varies depending on if you go with a new one or make one from gasket paper

    try just nipping the bolts down a micky hair and see what happens, you didnt perchance also notice she was a little harder to start and keep running did you?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 11th August 2007, 08:29 PM #3
    easo's Avatar
    easo
    easo is offline YarnMaster
    Join Date
    Dec 2006
    Location
    Sunny Pucka
    Posts
    3,138
    Total Downloaded
    0
    Starting still no dramas, but running cold idol diffrent story, still I pull the throttle out a little to give more revs, once warn push back in and no dramas running idol. Again its proble never been touched "ever".
    Reply With Quote Reply With Quote
  4. 11th August 2007, 08:38 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,496
    Total Downloaded
    0
    mate that being the case, shes a write off, sell her to some mechanic who will give her a fitting buiral.

    I just happen to know a gullable bloke up in queensland bout halfway between towoomba and brissy you could sell it to.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  5. 11th August 2007, 08:49 PM #5
    easo's Avatar
    easo
    easo is offline YarnMaster
    Join Date
    Dec 2006
    Location
    Sunny Pucka
    Posts
    3,138
    Total Downloaded
    0
    Hang on are we talking about my wife or my car?
    cheers dave.
    Reply With Quote Reply With Quote
« anyone used coil spacers in S2 Disco? | Series 1 owners........ »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!