Are you sure its the leads and not the plugs? I had similar problems in the past, pulled the plugs out and looked fine. I bought a new set anyway and that made it run smoother. So maybe a set of plugs is the go, its a cheapish replacement.
Hi All,
Is there an easy way to test a spark plug lead to see if it is faulty? I thought i read somewhere you can with a multimetre but i cannot find the thread.
I am having intermitant issues, the car surges or hesitates slightly. Started while on petrol only and has now progressed to on gas also. I had very similar problems 3-4 months ago, changed the coil lead and a random spark plug lead (was on a trip to Fraser so had to make do with spares i could get) and it has been good ever since. I have a feeling all the leads need replacing (or will in the near future) but would be interested in any simple tests to indicate a lead is breaking down. It is an injected 3.5 V8.
Thanks in advance for your help.
Are you sure its the leads and not the plugs? I had similar problems in the past, pulled the plugs out and looked fine. I bought a new set anyway and that made it run smoother. So maybe a set of plugs is the go, its a cheapish replacement.
Hi Stooge,
I replaced the plugs last time it played up, so about 4 months ago. Did not make a difference. Any way of checking plugs? Its hard when it does not happen all the time![]()
Google is your friend. Have a read of this. Lead resitance gets a mention down the page a bit.
http://www.mr2.com/TEXT/DavidKucharczyk/ignition.html
ohms meter on the lead will give you the answer to your leads condition, but you will have to work out wether they are the resistance type or not first. They should all be identical in resistance regardless of length.
dont forget to wiggle them while you do it.
plugs are about the same.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Yes - I posted something about a lead problem, probably about a year ago. Measure the resistance of each lead with an ohm meter - should all be about the same. The faulty one I had had visible burning in the centre conductor from one end, that you could see by looking in the end. Can't remember which end it was. With one faulty, I replaced the lot, as they were all the same age.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Thanks all. I just took a stab and ran the multimeter over them using ohm and one was higher then the others, most read about 6-7, one read 12. I also started the car and with a dark night i could see blue sparks within the wire..... more if i held the lead or the lead was against something. I think it is time for a whole set of leads.
Just grab it ya sook!!!![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks