Thread: Need plug for 14CUX 3.9 for o2sensors

Originally Posted by PhilipA

As detailed previously, I am currently in the process of fitting o2 sensors to my 92 Range Rover.
I have the sensors , have fittings on the pipes, have tune resistor.
All is ready to wire, BUT the sockets in the ECU plug are unobtainable new. I thought I could use telephone plugs , but they are a little too big. I guess as a last resort I could butcher it.
If anyone has a 40 pin plug with say 200CM of wire that they do not want, I would appreciate the contribution. I mean the plug which plugs into the socket on the ECU.Or even just say 5 of the connectors with 200CM pigtails.
They would have to be cut out of the plug so that the little lock tab is not broken.
I will write up the project on completion , so others can do it.
Regards Philip A

Give craig a call it ritters, i thought i saw some there the other day, might even have a butchered one.

I found them!!!!!
After about 8 hours of research on the internet, I suddenly realised that they are the same as injector plug connectors
I have bought 6 from an ebay store in Queensland for $6.75.
Unbelievable that there is no cross reference at the makers site, no knowledge at Farnells, even though I sent them photos.
Regards Philip A

maybe post the link, or part number for future reference here.

matt.