the batterys will walk backwards mark, they may take out the sc40 if you dont secure them
questions?? yep! what colour lecky tape should you use for the neg cable
cheers phil
I have recently installed - not yet connected as I need a good earth strap to connect the 2 batteries.
My -ve lead came through the side of the seatbox which was a bit tight on the battery,
so I moved it to enter the seatbox from the rear
Installed the dual battery controller
Temporary batteries - will be installing Red and Yellow Optimas in the opposite directions
Any questions about the install just ask!!!
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
the batterys will walk backwards mark, they may take out the sc40 if you dont secure them
questions?? yep! what colour lecky tape should you use for the neg cable
cheers phil
I used red tape - as it make the electricity go fast through the wires to the fridge
The original battery is secured using the LR bracket and I am going to put a piece of wood behind the aux battery to lock it up (there is no sideways movement)
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
while we are talking brackets, anyone know of someone making battery trays to hold 2 Optima batteries in the East / West style?
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
Just watch going over a bump that it doesn't jump up and arc out on the battery cover/lid...or do the covers have insulation on the underneath side
I have a thick rubber mat over the top of both batteries also.
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
See my reply in the other thread. Can't remember if the Optimas have mounting holes through them like the Exides do, but the Scorpion Racing tray does a very neat job if they do.
Shows tray with single battery in and clamps for second battery
Both batteries installed
Last edited by jik22; 12th September 2007 at 07:27 PM.
Jeff
1994 300TDi Defender
2010 TDV8 RRS
Here's a few pics from my County dual battery install:
Ron
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
I just filled the well in the bottom of the box with a pice of compressed fibro then used the original battery securing bracket.
They've been like that for the last 5 years, I also rivetted a piece of thick conveyor rubber to the underside of the box cover, I felt it was a bit close to the rear pos. terminal.
Martyn
1998 Defender
2008 Madigan
2010 Cape York
2012 Beadell, Bombs and other Blasts
2014 Centreing the Simpson
VKS-737 mob 7669
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks