Results 1 to 4 of 4

Thread: S2a suspention lift

  1. #1
    googe Guest

    S2a suspention lift

    Hey all,need some advice on how hard is it to lift a S2a's suspention about 3-4 inches,and is it worth it for just general beach bush 4x4?

    Cheers
    Greg

  2. #2
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    easy as you like it fit longer spring hangers and you can nab 2 inches without any dramas other than having to lenghten the brake hoses on the front and change the droop straps on the back if they're still fitted.

    if your only running it to and on the beach I wouldnt worry about doing it as the springs and the diff will still hit the sand first and stop you nicely, the only cure for that is bigger rubber or a spring over but that still leaves the diff as the low point...

    an 88inch shouldnt need any lifting with 16r7.50 sized rubber on it and thats about as good as a stock series rover needs for day to day use much more and your taxing the donk on the sand.

    a 109 will benifit from the extra inches esp in the ramp over angle and the departure angle...

    hope that helps.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  3. #3
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    1. I think most states limit the legal lift to 2" these days.

    2. Fitting military shackles and preferably the corresponding spring hangers will lift it nearly that much. The shackles are easy, but by themselves they change the angle of the axle, which at the rear will result in a bit of vibration, but at the front will upset the steering as well, although some have got away with it, and it can be corrected by wedges under the springs (which will lose you a bit of the lift). The lift with both hangers and shackles requires modification to the flywheel housing cross member to clear the front prop shaft.

    3. Regardless of the legality, anything over about two inches starts running into problems with the angle of the U-joints at the front and also at the rear if it is a swb. Also brings problems with the steering geometry, and overall stability.

    4. For general beach and bush work, in my view, no lift is indicated for the 2a, although having said this, my current 2a is a military version with effectively a lift of around 1.5". They are already more capable than almost all current four wheel drives. There is plenty of clearance for any sensible increase in tyre size without changing anything.

    5. Fitting parabolic springs will give you a bit of a lift as well as improved ride and articulation.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  4. #4
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    naff wedging the springs...

    If you know someone thats REALLY good with the grinder you can shave a couple of degrees out of the existing spring mounting plate and that also gains you a pompteenth of an inch of lift as well.

    the rear drivelinve vibe is easy to sort out if you happen to get it. First drop the propshaft, then check the handbrake and the diff flange for slop fix that if youve got it in excess then pull the propshaft apart at the slip joint, rotate it one spline left or right of center and refit the shaft, test drive it. If that works for ya cool, leave it there, if it gets worse pull it out again and go back the other way 2 splines.

    You may need to go more than one spline out of alignment but you should be able to get it sweet somewhere between aligned and not quite 90 degress out of phase.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!