Results 1 to 8 of 8

Thread: Fitted Air Suspension overide kit

  1. 14th October 2007, 11:24 PM #1
    Jezzaol's Avatar
    Jezzaol
    Jezzaol is offline Master
    Join Date
    Jul 2007
    Location
    Blue Mountains NSW
    Posts
    662
    Total Downloaded
    0

    Fitted Air Suspension overide kit

    Finaly got around to fitting the Airbag overide kit on my 96 HSE Rangie.

    Quite a simple job, kit from airbagman comes with everthing you need, Locate each air bag line coming from the valve block and cut them back far enough to get the fittings in. Assemble valves and tap,then connect the push to connect airlines. I drilled mounting points for my 4 valves in the Cruise Control bracket for easy access.
    Once done check system for leaks.

    Now I can isolate each bag and pump it manually in case of compressor or computer failure.
    Reply With Quote Reply With Quote
  2. 15th October 2007, 05:39 AM #2
    p38arover's Avatar
    p38arover
    p38arover is online now Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!     Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,704
    Total Downloaded
    1.63 MB
    Quote Originally Posted by Jezzaol View Post
    Finaly got around to fitting the Airbag overide kit on my 96 HSE Rangie.

    Quite a simple job, kit from airbagman comes with everthing you need, Locate each air bag line coming from the valve block and cut them back far enough to get the fittings in. Assemble valves and tap,then connect the push to connect airlines. I drilled mounting points for my 4 valves in the Cruise Control bracket for easy access.
    Once done check system for leaks.

    Now I can isolate each bag and pump it manually in case of compressor or computer failure.
    How much?
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever
    Reply With Quote Reply With Quote
  3. 15th October 2007, 03:45 PM #3
    adm333's Avatar
    adm333
    adm333 is offline Wizard
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    1,388
    Total Downloaded
    0
    Nice one.

    You can also build one of these quite easily. Its a manual EAS controller which allows you to bypass the ECU and control the actual compressor and air bags.

    I built this last week and used it on the weekend when I took the EAS apart to rebuild the valve block and compressor overhaul.

    Dave

    http://www.aulro.com/afvb/attachment...2&d=1192026251
    2011 Range Rover Sport SDV6 Autobiography
    2007 Range Rover Sport TDV6
    2004 Freelander TD4 SE
    1997 Range Rover 4.6 HSE
    1994 Range Rover Vogue
    ----------------------------------------
    Reply With Quote Reply With Quote
  4. 15th October 2007, 07:15 PM #4
    Jezzaol's Avatar
    Jezzaol
    Jezzaol is offline Master
    Join Date
    Jul 2007
    Location
    Blue Mountains NSW
    Posts
    662
    Total Downloaded
    0
    Neat Job, Very Comprehensive !! Where did you fit the panel ?

    The Airbag man kit sells for $295.00 can get from any Opposite Lock Store.
    Reply With Quote Reply With Quote
  5. 15th October 2007, 07:30 PM #5
    Jezzaol's Avatar
    Jezzaol
    Jezzaol is offline Master
    Join Date
    Jul 2007
    Location
    Blue Mountains NSW
    Posts
    662
    Total Downloaded
    0
    I will post some pics when I can work it out !
    Reply With Quote Reply With Quote
  6. 15th October 2007, 11:30 PM #6
    adm333's Avatar
    adm333
    adm333 is offline Wizard
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    1,388
    Total Downloaded
    0
    Its not a permanent fixture. Its a hand held unit that connects to the ECU connector when required.

    I basically followed instructions provided on the Rangerovers.net forum.

    I used an RS-232 cable and and joined the necessary wires to the ECU connector so all I have to do is plug it into the DB25 connector and its ready to go.

    Just a more robust way of using the "jumpers" method to control the EAS
    2011 Range Rover Sport SDV6 Autobiography
    2007 Range Rover Sport TDV6
    2004 Freelander TD4 SE
    1997 Range Rover 4.6 HSE
    1994 Range Rover Vogue
    ----------------------------------------
    Reply With Quote Reply With Quote
  7. 16th October 2007, 09:14 AM #7
    ytt105
    ytt105 is offline Master Supporter
    Join Date
    Jan 1970
    Location
    NSW Far South Coast
    Posts
    685
    Total Downloaded
    0
    adam333

    You can't just post a picture like that without all the gory details!!


    Some of us older ones have hearts that need to treated kindly, too much excitement can be dangerous!
    Reply With Quote Reply With Quote
  8. 16th October 2007, 10:56 AM #8
    adm333's Avatar
    adm333
    adm333 is offline Wizard
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    1,388
    Total Downloaded
    0
    It is quite well documented that if required you can bypass the EAS ECU by disconnecting the ECU and using jumper wires betweeen specific pins you will activate certain functions of the air suspension.

    People a lot cleverer than me worked all of this out.

    What i have done is enhanced the concept and built a series of switches to do the exact same thing. I soldered the corresponding wires to the back of the pins on the ecu connector and have a plug in between the switch box and the ECU. That way it just plugs in without having to fiddle about with wires. Who knows where you will be or what you will be doing when you really need it !!

    Then mount it into a pretty box and voila - for $30 you have a get out of jail free card ....... maybe.

    Here's another picture of it finished and connected...
    Attached Images Attached Images
    2011 Range Rover Sport SDV6 Autobiography
    2007 Range Rover Sport TDV6
    2004 Freelander TD4 SE
    1997 Range Rover 4.6 HSE
    1994 Range Rover Vogue
    ----------------------------------------
    Reply With Quote Reply With Quote
« small noise | The HS 2.8L Power Stroke replacement engine. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!