Thread: Starter Motor RRC Question ??

Craig mate i did the same to my magnetti marelli it broke off the bottom bolt lug on the alloy housing as it worked loose and the starter moved and broke it whilst cranking the engin ...

My fix was i welded it back together with my mig I first had a look and it was a clean break and it fitted back on were it broke neatly so i ground weld prep on either side of the crack all the way round both sides and ends then tacked it back on then test fitted it to make sure it was ok then i fully welded it with plenty of heat so it was strong then cleaned it up with a grinder and refitted it this was done about 2 months ago and it works fine I had the engin out 4 weeks ago and it all looked fine so im happy with the weld up job

Originally Posted by lokka

Craig mate i did the same to my magnetti marelli it broke off the bottom bolt lug on the alloy housing as it worked loose and the starter moved and broke it whilst cranking the engin ...

My fix was i welded it back together with my mig I first had a look and it was a clean break and it fitted back on were it broke neatly so i ground weld prep on either side of the crack all the way round both sides and ends then tacked it back on then test fitted it to make sure it was ok then i fully welded it with plenty of heat so it was strong then cleaned it up with a grinder and refitted it this was done about 2 months ago and it works fine I had the engin out 4 weeks ago and it all looked fine so im happy with the weld up job

Thanks for that, thought as much.
May be an option.

would that chemical weld steel putty stuff do the job?

I dont know how tough it is