you can but it is a waste...
you would use about 1/10th of a bottle per full tank if you have a std tank
I am about to go and fill up the tank and am going to add some ChemTech Diesel Power additive but the bottle only states to use no less then 25ml per 100L. It is a 250ml bottle....is it OK to add the lot to a full tank??
Cheers
you can but it is a waste...
you would use about 1/10th of a bottle per full tank if you have a std tank
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
...and is that really enough to make a difference and clean the injectors?
In a 75lt tank i add about 35-40ml... i find it works well.
90 Litre Disco tank, I add 25mL all the time (one notch on the bottle). For the first time or heavily fouled systems I used 50mL per 90L.
The 250ml bottle has white markers down the side of the label to indicate how much to use. Only problem, you have to guess approximate amounts until you get to the label.
thanks all...
lets hope it does something.....something positive
We stuck 100ml each in the 2 tanks on oldmans tojo 80 and witin 15min of driving we noticed a change![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks