Hi JustInc & Blknight,
You guys have hearts of gold.:):):):):):):):):):):):):):):):)
Printable View
Hi JustInc & Blknight,
You guys have hearts of gold.:):):):):):):):):):):):):):):):)
Quote:
Originally Posted by justinc
Well the news aint good:(
Output shaft no longer has any splines left on it
You're right, it is NOT good.:(
Let me know what you are thinking of doing, and I'll try to dig out some bits for you....:)
JC
i think it is safe to say you have now..Quote:
Originally Posted by Blknight.aus
it is quite common in my experience...
defenderkev, not good mate....
too far away to help you out in any way but am here for moral support if needed..
Quote:
Originally Posted by justinc
With the help of my local 4wd shop we are going to have a crack at rebuilding the box.
this happened to the Stage 1 twice. the second time i rebuilt the diff myself:twisted:
both times it was the front diff that went and i was able to drive by locking the centre diff. as you have no drive with it locked, i'm thinking that this is where you should start looking. best of luck
Good one Kev. Nothing like a challenge...:DQuote:
Originally Posted by defenderkev
If you need anything, let me know and I can try and get you parts as cheap as possible.;)
PM sent.
JC
Good to see some people read the WHOLE thread:DQuote:
Originally Posted by cowboycammo
what I should have said Is..Quote:
Originally Posted by incisor
I have never personally heard the output shaft go bang but have had 2 do the grindy death thing.
I just want to thank everyone who offered advice and especially the few who offered help either with rebuilding it or offering parts it is greatly appreciated...Theres some really great people on this site!
As for the rebuild TransferCase is out and will be stripped down tomorrow ready for some new bearings then i'll move onto the box....wont be rushing things so hopefully its up and running by xmas
Thanks again all:)