Results 1 to 4 of 4

Thread: coil spring suppressors

  1. 22nd January 2008, 05:53 PM #1
    longreach's Avatar
    longreach
    longreach is offline Master
    Join Date
    Jan 1970
    Location
    laidley queensland
    Posts
    236
    Total Downloaded
    0

    Cool coil spring suppressors

    HI fellas,were would one go to buy,spring suppressors........I have just received in the post from the USA...my Firestone poly air bags,whitch I hope to fit this week end......were would be the best place to buy them ,I am in the Brisbane area....and are thy hard to fit,never fitted them before....any help would be appreciated
    Reply With Quote Reply With Quote
  2. 22nd January 2008, 06:01 PM #2
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Suppressors or compressors ??

    Anyway, you don't need them.
    Just undo the shocks, jack the car up, support the chassis on chassis stands and with a trolley jack under the axle, drop it and you're springs will come away from the mounts.

    Easy peasy.
    Reply With Quote Reply With Quote
  3. 23rd January 2008, 03:11 PM #3
    longreach's Avatar
    longreach
    longreach is offline Master
    Join Date
    Jan 1970
    Location
    laidley queensland
    Posts
    236
    Total Downloaded
    0

    Cool

    Quote Originally Posted by rick130 View Post
    Suppressors or compressors ??

    Anyway, you don't need them.
    Just undo the shocks, jack the car up, support the chassis on chassis stands and with a trolley jack under the axle, drop it and you're springs will come away from the mounts.

    Easy peasy.
    Thanks for that.......I ve never done them before....I didn,t now it would be that easy......I ,ll give it a go this week end....thanks again
    Reply With Quote Reply With Quote
  4. 23rd January 2008, 07:47 PM #4
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,773
    Total Downloaded
    1.13 MB
    Quote Originally Posted by longreach View Post
    Thanks for that.......I ve never done them before....I didn,t now it would be that easy......I ,ll give it a go this week end....thanks again
    Take the wheel off the side being done then swap sides.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
« 95 fender clutch slave - pushrod | SU problem back!!! »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!