Huh is int that what is suposed to happen?
Does on my rangie light comes on when pads are low wire in pads shorts out on disc illuminating light on dash.
Brad![]()
Does anyone know where to buy a matching socket for the plugs that come on brake pad connectors please?
If these are a wire buried in the brake pad material, it woule not be difficult to connect this to a light on the dash, Pad earths to disk...light comes on .
Huh is int that what is suposed to happen?
Does on my rangie light comes on when pads are low wire in pads shorts out on disc illuminating light on dash.
Brad![]()
Range Rovers Have Charactors inside them
LROCWA Ex member 23 years
1971 Series 2A
2004 Discovery2a V8 Auto
2003 Discovery2a TD5 Manual
1982 4door man (sadly now gone)
1989 Vogue auto
2011 TDV8 Vogue
What would life be without a Rangie?
Yes - But my humble disco is not fitted with a brake pad light, and I'd like to fit one. To save changing the brake pad connector every time I change to pads, I'd like to fit the matching plug from the start. If I can find where to buy them this would be good. The dealer just says they come with a new harness only, now there's no need for that.
btw my 1970 citroen had the same set up - its not a new idea -
No not at all...but....Maybe try and find a wrecked rangie and go and cut them off. Or go and get some plugs and sockets that are readliy availible and fit your own. I had to repair mine onece and this is what I did.
Brad![]()
Range Rovers Have Charactors inside them
LROCWA Ex member 23 years
1971 Series 2A
2004 Discovery2a V8 Auto
2003 Discovery2a TD5 Manual
1982 4door man (sadly now gone)
1989 Vogue auto
2011 TDV8 Vogue
What would life be without a Rangie?
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks