Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: V8 on Gas intake

  1. 7th March 2008, 09:37 PM #11
    rovercare's Avatar
    rovercare
    rovercare is offline OldBushie
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Ok, so you have a complex type mixer ring, that isnt very long so i would just use the original filter box and replace the intake hose with reinforced hose that will be less likely to kink.
    No its a simple mixer, complex convertor

    No such thing as a simple mixer ring

    Get some suitable pipe to fit, thats all
    Reply With Quote Reply With Quote
  2. 5th April 2008, 04:39 PM #12
    Utemad's Avatar
    Utemad
    Utemad is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Dalby
    Posts
    4,011
    Total Downloaded
    0
    Quote Originally Posted by GrahamH View Post
    You may notice that I've got a stepper motor type power valve installed - I put an 02 sensor in the exhaust pipe at the Y in front of the main muffler to provide the feedback signal for the controller. It works extremely well and the vehicle drives the same on gas as it does on petrol with good economy on gas.
    Hi Graham,

    I'm looking into this stepper motor setup you have. What is required over a standard setup? Mine looks the same as yours except for the stepper motor on the power valve.

    I'm about to order the oxygen sensors for the 14CUX and do that so thought I might be able to just order/add this sensor while I have everything apart.
    Reply With Quote Reply With Quote
  3. 5th April 2008, 04:42 PM #13
    rovercare's Avatar
    rovercare
    rovercare is offline OldBushie
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Quote Originally Posted by rovercare View Post
    No its a simple mixer, complex convertor

    No such thing as a simple mixer ring

    Get some suitable pipe to fit, thats all
    That should say No such thing as a complex mixer ring, where's the Edit button gone
    Reply With Quote Reply With Quote
  4. 6th April 2008, 09:59 AM #14
    Utemad's Avatar
    Utemad
    Utemad is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Dalby
    Posts
    4,011
    Total Downloaded
    0
    This is an interesting link.
    Tinley Tech Limited System Upgrades

    It has kits for lambda control and vacuum control.

    Vacuum control is cheaper and easier to install but lambda control is better. According to their website anyway.
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« 300 Tdi timing belt wear | Modifying Disc Rotors »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!