Results 1 to 6 of 6

Thread: Rear tyre wear on 130 Tray back.

  1. 26th March 2008, 06:30 PM #1
    sumo
    sumo is offline Master
    Join Date
    Jan 1970
    Posts
    417
    Total Downloaded
    0

    Rear tyre wear on 130 Tray back.

    Hi

    Rotated the tyres around about 6mths ago, as the fronts were just starting to wear on the inside edge a bit, just noticed today they are still wearing the same way on the back , i would have thought on the rear they would even out across the tyre?, have i got something else going on?

    Cheers Sumo
    Reply With Quote Reply With Quote
  2. 26th March 2008, 08:53 PM #2
    bblaze
    bblaze is offline Wizard Subscriber
    Join Date
    Apr 2007
    Location
    NW Tassie
    Posts
    1,884
    Total Downloaded
    0
    from my experience, once a wear pattern develops it will continue even if put on the rear. I think it helps slow it down but you need to fix the front problem.
    cheers
    blaze
    Reply With Quote Reply With Quote
  3. 26th March 2008, 09:34 PM #3
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Mine do the same and the alignment is OK. It's a combination of (in my case) MT tyre, toe out and a driving/steering axle.
    You'll have to pull them off the rim and swap to the other side to beat the wear and keep them rolling the same way, which is what i do.
    Reply With Quote Reply With Quote
  4. 26th March 2008, 09:39 PM #4
    agrojnr's Avatar
    agrojnr
    agrojnr is offline Wizard
    Join Date
    Jan 1970
    Location
    Invermay Tasmania
    Posts
    1,732
    Total Downloaded
    0
    What pressure are you running I always had mine above 45psi and had no problem

    Adam
    Reply With Quote Reply With Quote
  5. 27th March 2008, 04:09 AM #5
    camel_landy's Avatar
    camel_landy
    camel_landy is offline YarnMaster
    Join Date
    Jan 1970
    Location
    Nanny state UK...
    Posts
    3,253
    Total Downloaded
    0
    Had something similar on my 110. Ended up having to change the bearings in one of the front swivels as they had collapsed.

    HTH

    M
    Reply With Quote Reply With Quote
  6. 27th March 2008, 05:12 AM #6
    sumo
    sumo is offline Master
    Join Date
    Jan 1970
    Posts
    417
    Total Downloaded
    0
    Usually running between 45- 50 psi.
    Reply With Quote Reply With Quote
« d2 shuttle valve | Radiator Stop Leak? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!