Thread: LT95 T-case tooth count

Originally Posted by 350RRC

Hi,

The info below is from HSVrangie, moderator from the OL forum.

'LT95 4spd transfer high range ratios and tooth counts

High range ratio 1.174 - 47 teeth
High range ratio 1.113 - 48 teeth
High range ratio 1.1227 - 43 teeth
High range ratio 0.99621 - 45 teeth

The tooth counts are on the large plain gear that is fitted to the
intermediate shaft.

thanks to
Swamp.'

cheers.

I know this is a bit of a dig, (at least I searched ) but does anyone know the LT95 tooth counts for the 1.3362 ratio as fitted to a V8 110 County? I'm buying some lower gears to suit my bigger tyres and want to make sure I'm getting the right ones.

Originally Posted by Dave_S

I have an LT95 behind my 4BD1 and I've been thinking about fitting a taller ratio gear set sold by FWD in Brisbane. I'm told it is roughly equivalent to having an overdrive (or 5th gear) when you are in 4th, but I don't know what the actual ratio works out to. The gears sold by FWD have 45 teeth (intermediate) and 26 teeth (high range gear).

Does anybody know how many teeth the standard t-case has on its input gear and on the intermediate gear that the input gear meshes with? Alternatively, does anybody know what the t-case ratio works out to with these gears fitted (at present I have the standard 0.996:1)

If anybody has tried this gear set and has any comments, I'd be happy to hear them.

Dave, What you have is already 0.996 :1 ratio 45/26 teeth. All you need to do now is fit a TRB with the same ratio. There is no higher ratio gearset, 0.996 is the highest you can get.