How do i mount this winch on my ARB bar?

Quote:

---

Originally Posted by TimNZ

Hi, according to my ARB parts catalouge you'll need the winch installation kit:

Part 3500050 $52.50

Cheers,

Tim

---

Plastic bag containing bolts, washers and a few cables...

Quote:

---

Originally Posted by streaky

I could well be wrong but isn't that bumper the ARB Descrete winch mount type?
It certainly looks like it.... I have exactly the same on my Discovery.
Mine doesn't have air bags but I needed a cradle to mount the winch. There was no other way of doing it that I could see.

S.

---

hi quick question for you , did you ever get the arb cradle for your winch >? i just bought a warn winch and cant see how to mount it to the arb bar. i must need a cradle, there are only 2 holes for the fairlead bolts to go though to only 2 of the 4 mounting feet on the winch, has any one got a pix of the arb cradle for a d1 ? im thinking of making one. bad idea ? :wasntme:cheers, jeff.

mine is a winch bar and i'm pretty sure I need a cradle looking at it doesn't look like enough space to safely fit a winch

Quote:

---

Originally Posted by Tombie2

Same bar as this one (although this was lifted 2")

http://inlinethumb44.webshots.com/42...500x500Q85.jpg

Winch bolted direct to front of bar... (12000lb MileMarker)
http://inlinethumb05.webshots.com/34...500x500Q85.jpg



Close Up (Had to grind a void for solonoids to fit on left)
http://inlinethumb33.webshots.com/15...500x500Q85.jpg

Heavy Duty "RUD" recover points inline with chassis rail each side...
Heavy plate washer behind each one!
http://inlinethumb51.webshots.com/28...500x500Q85.jpg

Hope that helps

---

There must be two sorts of ARB bars for disco. I have a 96 D1 with airbags My bar is not the same as the one in this pic. On mine it had to be hung from a cradle which bolts between chassis. My bar is not open at the top like in this pic and you cannot see the winch cable. The fairlead roller is only held in by two bolts.

My last 4x4 was a Rangie which I still have the bar off it. I went and checked and the front was identical to the one pictured here. My RR had a 10,000lb warn which would not fit in the disco so I had to go and buy a 9,000 lb. On the RR bar the roller fairlead was held on by four bolts, these bolts also the winch mounting bolts.

I would post some pics but I don't know how to.

Dave.

For the people here who are confusing the air bag compatible bar and the non airbag bar here is a new thread that shows the cradle from underneath on the airbag bar.

http://www.aulro.com/afvb/technical-...direction.html

Well, all the D1 ARB STEEL winch bars and winches I have fitted to them don't require a cradle, including SRS ones:confused:

JC

Its been awhile since i posted this thread now.:) But i have since taken this bar from my 1993 Disco without SRS and put it on my 1995 ES Disco with SRS.So it does fit up to SRS Discos.Hope this helps!
:D
Cheers
Chris

Quote:

---

Originally Posted by justinc

Well, all the D1 ARB STEEL winch bars and winches I have fitted to them don't require a cradle, including SRS ones:confused:

JC

---

There are obviously different types of bars. I took my vehicle to ARB and they told me it had to be mounted to a cradle.

I removed the winch off my RR which was bolted directly to the bar but there was no it could be fitted to my disco the same way. It was physically impossible.

Dave.

Quote:

---

Originally Posted by SPROVER

I just recently bought a winch for my 93 Disco.Having already got an ARB bar on there i thought it would just bolt straight on there.This is my very first winch so i am learning the ins and outs of installing it and how to use it.It is pretty much simple enough to wire it up but my main question is how do i mount it? Do i need to have something else to mount it on the bar? Just by looking at it i cant see where it would bolt down to.Hope someone can give me a bit more insight into it.I would really like to get it going:D
Cheers
Chris

first pic is of the bar
second is of the winch
third is where it is supposed to be mounted

---

Having had a better look at the Pic in this original post this bar is different to mine. It is the same design as my RR bar and the winch can be mounted direct to the bar.

If you look at the bar in this thread it is different(has only two holes for fairlead not four)and is the same as what is on my disco.

http://www.aulro.com/afvb/technical-...direction.html

Dave.

Quote:

---

Originally Posted by justinc

Well, all the D1 ARB STEEL winch bars and winches I have fitted to them don't require a cradle, including SRS ones:confused:

JC

---

ARB SRS compatible bars have a winch cradle, But they have all the same normal winch mounting points also;)