Thread: 3" spring lift for a disco 1

Originally Posted by long stroke

Thanks John what springs do you use?

CHEERS TIM.

I'm using landcruiser front springs manufactured by Kings Springs. Probably would have been just as easy to get 2nd hand stock lancruiser front springs for the similar results.

For the springs in the front of my disco, the Kings part number is KTFS94C and KTFS69C for the springs I have at the rear.

The part number break down is K for Kings Springs, T for Toyota, F for Front, S for Standard ride height, 94 for a number to differentiate the particular spring, C for Comfort series.

The difference between the 94 and 69 is the free length of the spring to suit a change in different year model landcruisers.

Originally Posted by goldey

Bush65

Very intrigued with your suspension setup. What shocks are you using with these springs? Reason I am asking is that I have a standard 2 inch lift that has sagged a wee bit and am looking at getting new springs that will hopefully still work with my current shocks (Rancho adjustables). I live in Newy by the way (Kotara).

Cheers
Goldey

LRA +2" Bilstein.

I have extended the upper shockie mounts to suit, but I think it will be best to lower the bump stops and go back to stock upper mounts.

I'm only about 20 - 25 mins south of there if you want to drop by.

But the recent wet weather has set me back with my preparations - have much to do this weekend because I must leave early on the following Sat for the far side (of the Simpson Desert). So no chance of a test drive, or a long chat before I return at the end of July.